Good Morning guys,
Yesterday I wiped the dust of my winter hobby. Not that i think that summer is finished, but I felt like playing with it.
I am getting stuck with I think getting data from the serial connection from the GPS.
The program does not go passed the first loop. The state of GPS_Data_Valid_Check is not changing, eventhough the GPS lick has a fix as the LED is flashing.
The Display shows;
Waiting for fix
&
Buffer overflow
0
I am 99,9% sure the hardware is correct.
Am I missing something?
I am using the ECIO40P with BaseBoard, EB076 Display and Lea-6s MikroE GPS Click with LEA-6S
Flowcode V6
Dutchie
ECIO40 & GPS-Click & EB076 Problem
Moderator: Benj
- Dutchie_World_Wide
- Posts: 31
- Joined: Thu Jul 08, 2010 8:52 am
- Location: The Netherlands, or Thailand, or Gabon West Africa
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
ECIO40 & GPS-Click & EB076 Problem
- Attachments
-
- Screen GPS Temp 433Mhz.fcfx
- (31.56 KiB) Downloaded 199 times
Dutchie
"This is not a bug, this is a feature!"
"This is not a bug, this is a feature!"
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: ECIO40 & GPS-Click & EB076 Problem
Hello,
If you switch the baud rate of the GPS component to 4800 then does it allow it to work? Looks like the module has a few different startup modes so might have to play around with the settings.
If you switch the baud rate of the GPS component to 4800 then does it allow it to work? Looks like the module has a few different startup modes so might have to play around with the settings.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Dutchie_World_Wide
- Posts: 31
- Joined: Thu Jul 08, 2010 8:52 am
- Location: The Netherlands, or Thailand, or Gabon West Africa
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
Re: ECIO40 & GPS-Click & EB076 Problem
Thanks Benj,
I changed the GPS true USB to a higher baud rate but forgot to set the proper baud rate on the board
Dutchie
I changed the GPS true USB to a higher baud rate but forgot to set the proper baud rate on the board
Dutchie
Dutchie
"This is not a bug, this is a feature!"
"This is not a bug, this is a feature!"