Hi Guys,
The EB063 data sheet mentions that a voltage level shifter is used.
But the data sheet of the Alpha-TRX*** says the module can be used between 2-5 Volt.
Is the data sheet for the EB063 outdated or did I miss something in the Alpha-TRX datasheet?
DWW
EB063 & Alpha-TRX voltage in datasheet
Moderator: Benj
- Dutchie_World_Wide
- Posts: 31
- Joined: Thu Jul 08, 2010 8:52 am
- Location: The Netherlands, or Thailand, or Gabon West Africa
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB063 & Alpha-TRX voltage in datasheet
Hello,
Looking at the microchip IC datasheet the absolute max voltage on VDD is 6V. i.e. 6V won't cause permanent damage but probably won't work.
The working VDD voltage is listed as 2V2 to 3V8.
I/O pins are listed as absolute max of VDD + 1V5.
Can you show me which datasheet your looking at?
Looking at the microchip IC datasheet the absolute max voltage on VDD is 6V. i.e. 6V won't cause permanent damage but probably won't work.
The working VDD voltage is listed as 2V2 to 3V8.
I/O pins are listed as absolute max of VDD + 1V5.
Can you show me which datasheet your looking at?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel