PIC16F1779 is not supported

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 6.

Moderator: Benj

PicoPuls
Posts: 111
Joined: Wed Mar 02, 2016 11:26 am
Has thanked: 43 times
Been thanked: 22 times
Contact:

PIC16F1779 is not supported

Postby PicoPuls » Mon May 23, 2016 7:21 am

PIC16F1779 is not supported , probably because it is a new component.

I need 4 DA outputs

Any advice what to do ?

Thanks and Best regards

User avatar
Bachman
Posts: 64
Joined: Sun Sep 07, 2014 11:37 am
Location: Hungary
Has thanked: 8 times
Been thanked: 35 times
Contact:

Re: PIC16F1779 is not supported

Postby Bachman » Mon May 23, 2016 8:05 pm

External D/A converter.

Kenrix2
Flowcode v5 User
Posts: 211
Joined: Tue Feb 19, 2013 9:51 pm
Has thanked: 72 times
Been thanked: 177 times
Contact:

Re: PIC16F1779 is not supported

Postby Kenrix2 » Tue May 24, 2016 7:09 am

I use PWM connected to an RC filter and an opamp for a variable voltage output. viewtopic.php?f=46&t=14856&p=59998&hilit=4+20ma&sid=558d00a43291e6a89e22abc74fe552cc#p60161

User avatar
Benj
Matrix Staff
Posts: 14669
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4655 times
Been thanked: 4273 times
Contact:

Re: PIC16F1779 is not supported

Postby Benj » Thu May 26, 2016 11:57 am

Hello,

The 16F1779 is not supported by the compiler in Flowcode 6 so currently not possible to support this device.

I am adding it to the list for Flowcode 7 which has a new compiler which does support the device.