USB HID FLOWCODE 6
Moderator: Benj
USB HID FLOWCODE 6
HOW DO YOU CHANGE THE VENDOR ID AND PRODUCT ID TO THE ONE I HAVE. IT KEEPS GOING TO 0
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: USB HID FLOWCODE 6
Hello,
The IDs will probably be in hexadecimal so make sure you enter 0x before the four digit hex value.
e.g. 0xABCD
The property will convert the value to decimal automatically, there is currently no way to show the value as hex though we have been working on this for v7.
Note. Writing in all caps is often seen as shouting.
The IDs will probably be in hexadecimal so make sure you enter 0x before the four digit hex value.
e.g. 0xABCD
The property will convert the value to decimal automatically, there is currently no way to show the value as hex though we have been working on this for v7.
Note. Writing in all caps is often seen as shouting.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: USB HID FLOWCODE 6
Holding Ctrl and pressing + will zoom in and make font much larger.JANUARY1 wrote:never had glasses on easy to read
Ctrl and pressing - will zoom out again.
Martin.
Martin