Page 1 of 1

Help with LCD connection

Posted: Tue Jan 09, 2018 5:12 pm
by kostalex
Hello I would like your help.

I have an LCD screen which uses RA8835. I was going through the flowcode examples and I see that the example that uses KS0108 LCD has cs1 and cs2 pins. My LCD (RA8835) only has a CS pin. Do you know what I have to change in the aformentioned example in flowcode in order to make it work?

Re: Help with LCD connection

Posted: Tue Jan 09, 2018 6:19 pm
by Benj
Hello,

I don't think we currently support this display driver IC. I'll add it to the list to try and investigate.

Re: Help with LCD connection

Posted: Wed Jan 10, 2018 6:03 pm
by kostalex
Thanks. we will looking forward your reply cause we really need it for our project

Re: Help with LCD connection

Posted: Wed Jan 10, 2018 6:10 pm
by Benj
Hello,

The display would be a new addition so won't be included with Flowcode 6. Would Flowcode 7 be an option for you or would you like to see how GLCD components are made so you can have a go yourself.

This should show you how the components are created and applies to v6 as well as v7.
viewtopic.php?f=66&t=19116

Re: Help with LCD connection

Posted: Fri Jan 12, 2018 3:31 pm
by kostalex
Hello
thanks for the link but I don't think i will be able to make it work. I want to use a glcd 5.7" but the only one i found is the ra8835 ,,, http://www.buydisplay.com/
ERM320240-2_Series_Datasheet.pdf
(343.56 KiB) Downloaded 189 times
I think to buy the flowcode 7 when included the component GLCD RA8835