Matrix user forums

Code: Select all

#define MX_AVR

//Defines for microcontroller
#define MX_AVR
#define MX_EE
#define MX_EE_SIZE 4096
#define MX_SPI
#define MX_SPI_B
#define MX_SPI_SDI 3
#define MX_SPI_SDO 2
#define MX_SPI_SCK 1
#define MX_UART
#define MX_UART_E
#define MX_UART_TX 1
#define MX_UART_RX 0
#define MX_PWM
#define MX_PWM_PORT PORTB
#define MX_PWM_CNT 2
#define MX_PWM_TRIS1 DDRB
#define MX_PWM_1 5
#define MX_PWM_TRIS2 DDRB
#define MX_PWM_2 6

//Functions
#define F_CPU 16000000UL
#include <avr\io.h>
#include <avr\interrupt.h>
#include <avr\eeprom.h>
#include <MX_util\delay.h>
#include <MX_util\bit_cmds.h>

//Configuration data
#pragma DATA 0x0, 0xdf
#pragma DATA 0x1, 0xff
#pragma DATA 0x2, 0xff

//Internal functions
#include "C:\Program Files\Matrix Multimedia\Flowcode_AVR\FCD\internals.h"

//Macro function declarations
short FCM_stej();


//Variable declarations
volatile short FCV_OVER;
volatile short FCV_COUNT;



//Supplementary defines


//Macro implementations

short FCM_stej()
{
	
	//Local variable definitions
	short FCL_COUNT;

	short FCR_RETVAL;

	//STEJ
	//Calculation:
	//  over = over + 1
	FCV_OVER =  FCV_OVER + 1 ;
	

	return (FCR_RETVAL);
}

//Supplementary implementations


int main()
{
	
	//Initialisation
	MCUCR=0x00;
	MCUCSR=0x00;
	WDTCR=0x10;


	//Interrupt initialisation code
	EICRA=0x00;
EICRB=0x00;


	//Interrupt
	//Interrupt: Enable OCR0
	sei();
	TIMSK &= ~(1<<OCIE0);
	ASSR |= (1<<AS0);
	TCNT0=0x00;
	OCR0=32;
	TCCR0=0x0F;
	WHILE((TCN0UB!=0)&(OCR0UB!=0)&(TCR0UB!=0))
	{
	}
	TIFR &= ~(1<<OCF0);
	OCIE0 |= (1<<OCIE0);



	//Loop
	//Loop: While 1
	while( 1 )
	{
		//Calculation
		//Calculation:
		//  count = count + 1
		FCV_COUNT =  FCV_COUNT + 1 ;
		

	}


	mainendloop: goto mainendloop;
}

	ISR($001E)
	{
	FCM_stej(); // call selected macro
	}