Pickit 3 FC7

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

howard123
Posts: 71
Joined: Thu May 24, 2012 1:15 pm
Location: Cape Town
Has thanked: 29 times
Been thanked: 28 times
Contact:

Pickit 3 FC7

Postby howard123 » Thu Jul 14, 2016 12:02 pm

Hello
Anyone successfully used PICkit3 with FC7 and the new compiler.
PICkit3 works with my MPLAB IPE 3.35 so just wanted to make sure there are no issues beforehand.
thanks guys
These users thanked the author howard123 for the post:
Jay Dee (Thu Jul 14, 2016 12:12 pm)
Rating: 5%
 

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8618
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2480 times
Been thanked: 3567 times
Contact:

Re: Pickit 3 FC7

Postby medelec35 » Thu Jul 14, 2016 1:14 pm

Howard,
I have successfully programmed using PICkit3 via FC7:

Code: Select all

Launching the compiler...
C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe  --chip=16F1937 "pickit3_test.c" --MSGDISABLE=359,1273,1388
......

Memory Summary:
    Program space        used    87h (   135) of  2000h words   (  1.6%)
    Data space           used    23h (    35) of   200h bytes   (  6.8%)
    EEPROM space         used     0h (     0) of   100h bytes   (  0.0%)
    Data stack space     used     0h (     0) of   1DCh bytes   (  0.0%)
    Configuration bits   used     2h (     2) of     2h words   (100.0%)
    ID Location space    used     0h (     0) of     4h bytes   (  0.0%)

Microchip MPLAB XC8 C Compiler (Free Mode) V1.36
Build date: Jan 14 2016
Part Support Version: 1.36
Copyright (C) 2016 Microchip Technology Inc.
License type: Node Configuration


You have compiled in FREE mode.
Using Omnicient Code Generation that is available in PRO mode,
you could have produced up to 60% smaller and 400% faster code.
See http://www.microchip.com/MPLABXCcompilers for more information.


Launching the linker/assembler...
C:\Program Files (x86)\Flowcode 7\tools\DoNothing\DoNothing.exe 

Launching the programmer...
C:\Program Files (x86)\Flowcode 7\tools\PICkit3\pk3cmd.exe  -P16F1937 -Fpickit3_test.hex -E -M -Y

Connecting...
PICkit 3 detected
Connecting to PICkit 3...
Firmware Suite Version...... 01.28.18
Firmware type......................Enhanced Midrange .

PICkit 3 Connected.
Target Detected
Device ID Revision = 00000006

Erasing ...
Erase device complete .


Programming Device ...
Programming/Verify complete

Verifying Device ...
Verify complete

FINISHED

The settings I got from here
Once you entered all the details you will need to select save then enter the programmer name e.g. PICkit3.

Don't forget you can't have spaces within flowchart name.
Instead of space you can use underscore.
When you scroll down to Programmer, you will see this was intended for FC6, but same parameters apply to Flowcode V7

Martin
These users thanked the author medelec35 for the post (total 4):
Steve (Thu Jul 14, 2016 2:21 pm) • kersing (Thu Jul 14, 2016 2:39 pm) • dazz (Thu Jul 14, 2016 8:09 pm) • howard123 (Thu Jul 21, 2016 10:44 am)
Rating: 20%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.

Kenrix2
Flowcode v5 User
Posts: 211
Joined: Tue Feb 19, 2013 9:51 pm
Has thanked: 72 times
Been thanked: 177 times
Contact:

Re: Pickit 3 FC7

Postby Kenrix2 » Thu Jul 14, 2016 10:41 pm

Right now the wiki link posted above has outdated information. I followed the instructions from the following link and have had no issues using newer devices.
viewtopic.php?f=54&t=12970&p=62409&hilit=pickit3+parameters#p74807
These users thanked the author Kenrix2 for the post:
howard123 (Thu Jul 21, 2016 10:45 am)
Rating: 5%
 

User avatar
PaulNe
Posts: 27
Joined: Fri Jul 05, 2013 8:36 am
Has thanked: 2 times
Been thanked: 22 times
Contact:

Re: Pickit 3 FC7

Postby PaulNe » Fri Jul 15, 2016 9:33 am

Hi all,

The PICKIT info has been updated on the Wiki, but at a different link;
http://www.matrixtsl.com/wikiv7/index.php?title=Supporting_Third_Party_Programming_Tools#PICkit3_using_MPLABX_IPE_.28NEW.29

We will be updating the compiler options for each chip family ASAP. As Steve said in another post, regarding the Wiki, it's a huge resource and requires a lot of effort to make sure it's all up to date. I'll try get on to sorting the compiler options for each family today all being well. Once sorted we'll report back.

Hope the above helps you out howard123?
These users thanked the author PaulNe for the post (total 3):
dazz (Fri Jul 15, 2016 12:35 pm) • kersing (Fri Jul 15, 2016 2:10 pm) • howard123 (Thu Jul 21, 2016 10:46 am)
Rating: 15%