Hello
Anyone successfully used PICkit3 with FC7 and the new compiler.
PICkit3 works with my MPLAB IPE 3.35 so just wanted to make sure there are no issues beforehand.
thanks guys
Pickit 3 FC7
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Pickit 3 FC7
Howard,
I have successfully programmed using PICkit3 via FC7:
The settings I got from here
Once you entered all the details you will need to select save then enter the programmer name e.g. PICkit3.
Don't forget you can't have spaces within flowchart name.
Instead of space you can use underscore.
When you scroll down to Programmer, you will see this was intended for FC6, but same parameters apply to Flowcode V7
Martin
I have successfully programmed using PICkit3 via FC7:
Code: Select all
Launching the compiler...
C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe --chip=16F1937 "pickit3_test.c" --MSGDISABLE=359,1273,1388
......
Memory Summary:
Program space used 87h ( 135) of 2000h words ( 1.6%)
Data space used 23h ( 35) of 200h bytes ( 6.8%)
EEPROM space used 0h ( 0) of 100h bytes ( 0.0%)
Data stack space used 0h ( 0) of 1DCh bytes ( 0.0%)
Configuration bits used 2h ( 2) of 2h words (100.0%)
ID Location space used 0h ( 0) of 4h bytes ( 0.0%)
Microchip MPLAB XC8 C Compiler (Free Mode) V1.36
Build date: Jan 14 2016
Part Support Version: 1.36
Copyright (C) 2016 Microchip Technology Inc.
License type: Node Configuration
You have compiled in FREE mode.
Using Omnicient Code Generation that is available in PRO mode,
you could have produced up to 60% smaller and 400% faster code.
See http://www.microchip.com/MPLABXCcompilers for more information.
Launching the linker/assembler...
C:\Program Files (x86)\Flowcode 7\tools\DoNothing\DoNothing.exe
Launching the programmer...
C:\Program Files (x86)\Flowcode 7\tools\PICkit3\pk3cmd.exe -P16F1937 -Fpickit3_test.hex -E -M -Y
Connecting...
PICkit 3 detected
Connecting to PICkit 3...
Firmware Suite Version...... 01.28.18
Firmware type......................Enhanced Midrange .
PICkit 3 Connected.
Target Detected
Device ID Revision = 00000006
Erasing ...
Erase device complete .
Programming Device ...
Programming/Verify complete
Verifying Device ...
Verify complete
FINISHED
Once you entered all the details you will need to select save then enter the programmer name e.g. PICkit3.
Don't forget you can't have spaces within flowchart name.
Instead of space you can use underscore.
When you scroll down to Programmer, you will see this was intended for FC6, but same parameters apply to Flowcode V7
Martin
Martin
-
- Flowcode v5 User
- Posts: 211
- Joined: Tue Feb 19, 2013 9:51 pm
- Has thanked: 72 times
- Been thanked: 177 times
- Contact:
Re: Pickit 3 FC7
Right now the wiki link posted above has outdated information. I followed the instructions from the following link and have had no issues using newer devices.
http://www.matrixtsl.com/mmforums/viewt ... ers#p74807
http://www.matrixtsl.com/mmforums/viewt ... ers#p74807
- PaulNe
- Posts: 27
- Joined: Fri Jul 05, 2013 8:36 am
- Has thanked: 2 times
- Been thanked: 23 times
- Contact:
Re: Pickit 3 FC7
Hi all,
The PICKIT info has been updated on the Wiki, but at a different link;
http://www.matrixtsl.com/wikiv7/index.p ... _.28NEW.29
We will be updating the compiler options for each chip family ASAP. As Steve said in another post, regarding the Wiki, it's a huge resource and requires a lot of effort to make sure it's all up to date. I'll try get on to sorting the compiler options for each family today all being well. Once sorted we'll report back.
Hope the above helps you out howard123?
The PICKIT info has been updated on the Wiki, but at a different link;
http://www.matrixtsl.com/wikiv7/index.p ... _.28NEW.29
We will be updating the compiler options for each chip family ASAP. As Steve said in another post, regarding the Wiki, it's a huge resource and requires a lot of effort to make sure it's all up to date. I'll try get on to sorting the compiler options for each family today all being well. Once sorted we'll report back.
Hope the above helps you out howard123?