Matrix user forums

Hi
I purchased "Flowcode 7" with "AVR / Ard, CommsA, Display, I/O and Misc Features Pack", to see the internal memory EEPROM which feature I have
to buy?
thanks

Please see page 25 ....
http://www.matrixtsl.com/resources/file ... k-info.pdf

Hi
then with "test and debugging pack" I can see the inside EEPROM.
correct?

Hello,

The EEPROM component is included with the MiscA component pack. You should be able to see and edit the contents of the EEPROM memory using the console window.

I don't think you need the Test and Debugging pack to allow this.

I can not use windows console to see the inside of the EEPROM.
is there any example to use windows console to see the inside of the EEPROM?
thanks

Hi luibra63,
With EEPROM added, can show a screen shot of the console Window (View, Console menu).
Here is what my Console looks like: Martin

Hi Martin
thanks for your answer but when I click on "wiew and console" menu, does not open anything.
sorry but i'm new in flocwode.
thanks

Every time you select View, Console the tick should either appear (console active) or disappear (console inactive)
So the console is toggled on and off.

Perhaps you have accidentally integrated console with another window.

E.g simulation debugger, 2D or 3D panel:?
If so you can left click on the console tab, holding down the left mouse button, drag the console tab away from the panel.
There is a way to set all the windows including console to the default settings, but in involves deleting Flowcode registry entry and it should be the very last resort.
I have an idea.
Can you load a flowchart, enable 2D and 3D panels
press F8 then take a screen shot of the whole work space like this: Martin

Hi Martin
I tried again, does not activate the console and do not see the internal memory window.
I have a bad idea. Probably console is not active in the standard version of Flowcode?
I do not have the professional version I have the standard version + display + input / output + CommA + Misca and TestDegug. I have not mechanicall and DSP pack.
best regards

The console is available in all versions. Please post a screenshot as Martin requested to allow us to help you further.

Hi Lewis
This is my screenshot, its's very simple, Best Regards

Hi Just found this post by Benj

I believe matrix should add that info to the fc7 components pack.

Martin

thanks Martin
But in this post we talk of version 6.
Version 7 is different?
there is not written anywhere that the standar version is limited compared with the professional vesion.
the only difference is that with the professional version you can sell the projects, but it is not my case!

Benj or Matrix Staff, what should I do?
Version 7 is an error?
Best Regards

Hi luibra63

luibra63 wrote:But in this post we talk of version 6.

Yes it is regards version 6 and just assuming same applies to version 7
Will see what Matrix staff say.

At the moment I'm running the Free mode and the console window does not appear or allow itself to become ticked on the menu.

The 30-day mode should allow you to use it.

We are investigating now what should be happening with the console. i.e. should it be free or part of the test and debug pack.

Hi,

Just to let you all know that the console has now been modified so that it does not require the pro licence, but it does however require the test and debug pack. It will also work in the 30 day trial. A patch will be release very soon.

Regards,
Simon

very well
We expect the patch
best regards

Hi Martin, Lewis and Matrix Staff
I installed 7.1.1 patch, the console works perfectly and I can see the internal eeprom.
thank you all