error code -1
Moderator: Benj
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
error code -1
Hello
I have probleme to compile.
Change short and long name no succsess
Any ideas
Regards wolfgang
I have probleme to compile.
Change short and long name no succsess
Any ideas
Regards wolfgang
- Attachments
-
- error code.GIF (116.93 KiB) Viewed 11390 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: error code -1
Hi,
What version of Flowcode are you running? (Menu Help->About Flowcode)
Could you look in your Flowcode7 installation directory, in \compilers\STARM\batch and see if you have the file F429Disco.bat
Thanks
What version of Flowcode are you running? (Menu Help->About Flowcode)
Could you look in your Flowcode7 installation directory, in \compilers\STARM\batch and see if you have the file F429Disco.bat
Thanks
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
Re: error code -1
hello
- Attachments
-
- batch.gif (20.86 KiB) Viewed 11384 times
-
- vers..GIF (9.44 KiB) Viewed 11384 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: error code -1
If you change the target to another ST ARM, such as 32F405RE, does that compile OK?
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: error code -1
Since installation, has Flowcode compiled anything?
Do other targets such as PIC 16F1937 compile?
Do other targets such as PIC 16F1937 compile?
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
Re: error code -1
hi LeighM
I install on my laptop v7 also and have the same problems to compile the arm-projekts.
with the pic no problem.
Regards wolfgang
I install on my laptop v7 also and have the same problems to compile the arm-projekts.
with the pic no problem.
Regards wolfgang
- Attachments
-
- compile ok.GIF (172.07 KiB) Viewed 11372 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: error code -1
Strange.
Does an AVR target compile, e.g. Arduino Uno?
This FAQ might help ...
http://www.matrixtsl.com/faq/index.php? ... artlang=en
Does an AVR target compile, e.g. Arduino Uno?
This FAQ might help ...
http://www.matrixtsl.com/faq/index.php? ... artlang=en
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
Re: error code -1
Hi
After new install with eneable 8.3 compiler is ok,but I have a new error
Regards Wolfgang
After new install with eneable 8.3 compiler is ok,but I have a new error
Regards Wolfgang
- Attachments
-
- new error F746.GIF (124.54 KiB) Viewed 11362 times
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: error code -1
The gLCD has to match the target device.
You cannot use the 429 gLCD with 746 device.
Have a scroll through the gLCD components and you will see the correct display for whichever Discovery board target you want to use
You cannot use the 429 gLCD with 746 device.
Have a scroll through the gLCD components and you will see the correct display for whichever Discovery board target you want to use
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact: