error code -1

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

error code -1

Post by saschech@gmx.de »

Hello

I have probleme to compile.
Change short and long name no succsess
Any ideas

Regards wolfgang
Attachments
error code.GIF
error code.GIF (116.93 KiB) Viewed 5838 times

User avatar
LeighM
Matrix Staff
Posts: 2043
Joined: Tue Jan 17, 2012 10:07 am
Contact:

Re: error code -1

Post by LeighM »

Hi,

What version of Flowcode are you running? (Menu Help->About Flowcode)

Could you look in your Flowcode7 installation directory, in \compilers\STARM\batch and see if you have the file F429Disco.bat

Thanks

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

Re: error code -1

Post by saschech@gmx.de »

hello
Attachments
batch.gif
batch.gif (20.86 KiB) Viewed 5832 times
vers..GIF
vers..GIF (9.44 KiB) Viewed 5832 times

User avatar
LeighM
Matrix Staff
Posts: 2043
Joined: Tue Jan 17, 2012 10:07 am
Contact:

Re: error code -1

Post by LeighM »

If you change the target to another ST ARM, such as 32F405RE, does that compile OK?

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

Re: error code -1

Post by saschech@gmx.de »

hello

The same
Attachments
405re.GIF
405re.GIF (230.57 KiB) Viewed 5826 times

User avatar
LeighM
Matrix Staff
Posts: 2043
Joined: Tue Jan 17, 2012 10:07 am
Contact:

Re: error code -1

Post by LeighM »

Since installation, has Flowcode compiled anything?
Do other targets such as PIC 16F1937 compile?

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

Re: error code -1

Post by saschech@gmx.de »

hi LeighM

I install on my laptop v7 also and have the same problems to compile the arm-projekts.

with the pic no problem.

Regards wolfgang
Attachments
compile ok.GIF
compile ok.GIF (172.07 KiB) Viewed 5820 times

User avatar
LeighM
Matrix Staff
Posts: 2043
Joined: Tue Jan 17, 2012 10:07 am
Contact:

Re: error code -1

Post by LeighM »

Strange.
Does an AVR target compile, e.g. Arduino Uno?

This FAQ might help ...
http://www.matrixtsl.com/faq/index.php? ... artlang=en

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

Re: error code -1

Post by saschech@gmx.de »

Hi

After new install with eneable 8.3 compiler is ok,but I have a new error

Regards Wolfgang
Attachments
new error F746.GIF
new error F746.GIF (124.54 KiB) Viewed 5810 times

User avatar
LeighM
Matrix Staff
Posts: 2043
Joined: Tue Jan 17, 2012 10:07 am
Contact:

Re: error code -1

Post by LeighM »

that's good then :D

could you attach your Flowcode project file? (.fcfx)
thanks

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

Re: error code -1

Post by saschech@gmx.de »

hi

no problem
Attachments
Versuch001.rar
(292.29 KiB) Downloaded 117 times

User avatar
LeighM
Matrix Staff
Posts: 2043
Joined: Tue Jan 17, 2012 10:07 am
Contact:

Re: error code -1

Post by LeighM »

The gLCD has to match the target device.
You cannot use the 429 gLCD with 746 device.
Have a scroll through the gLCD components and you will see the correct display for whichever Discovery board target you want to use

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Contact:

Re: error code -1

Post by saschech@gmx.de »

Hi

After do all new,show all ok on the display.

Thank you

Post Reply