Is there a circuit diagram for the e-block093(arduino uno shield),
as i need to know which pins go to the outputs sockets.?
there is no diagram in the pdf file for this board.
Regards astro1234.
circuit diagram for the e-block093 (arduino uno shield)
Moderator: Benj
-
- Posts: 188
- Joined: Thu Jun 28, 2012 7:29 pm
- Location: Durham
- Has thanked: 86 times
- Been thanked: 186 times
- Contact:
Re: circuit diagram for the e-block093 (arduino uno shield)
Hi astro1234
There are a great many resources to be found in the 'Learning' center for many of the Flowcode modules. However, here is the data sheet that hopefuly explains what you require:
The EB093 Arduino Sheild D-SUB Connectors Hope to helps.
Dave
There are a great many resources to be found in the 'Learning' center for many of the Flowcode modules. However, here is the data sheet that hopefuly explains what you require:
The EB093 Arduino Sheild D-SUB Connectors Hope to helps.
Dave
-
- Posts: 50
- Joined: Mon Apr 10, 2017 12:53 pm
- Has thanked: 39 times
- Been thanked: 13 times
- Contact:
Re: circuit diagram for the e-block093 (arduino uno shield)
Thank you for the files, but if you look at the pdf file for the board there is no circuit diagram ,example what pins on the arduinojohnsondav wrote:Hi astro1234
There are a great many resources to be found in the 'Learning' center for many of the Flowcode modules. However, here is the data sheet that hopefuly explains what you require:
The EB093 Arduino Sheild D-SUB Connectors Hope to helps.
Dave
go to the what pins on the rs232, so i got the meter out
and found out which pins are what, it as a bit of a weird layout.
What i am doing is connecting the eblocks to the arduino,and then running and operating them from labview.
Regards astro1234.