Matrix user forums

I am looking for a way to monitor all of the values in a ram array during simulation.

After reading this post, http://www.matrixtsl.com/mmforums/viewt ... 63&t=19480, it appears the Console is available for the Standard version by adding the "Test and Debugging" license.

Can the Console simulate a Ram array? Not sure if the attached would work which, I pieced together from the Wikiv7 . Am I on the right track? Any help is appreciated.

I just want to make sure the Console will do what I need before making the purchase.

Hi Kenrix2,
This is what you can see if you have the Test and Debugging: Hope this helps

Martin

Thanks for showing me that.

Nice to see that it has scroll bars.

The Console seems to be printing the command /n instead of actually creating a new line.

Flowcode7 simplifies the use of larger arrays. Not having to deal with bank and page limitations is a real treat. Not sure if simulating them is doable though.

Hi.

Kenrix2 wrote:The Console seems to be printing the command /n instead of actually creating a new line.

I have just noticed that it should be \n instead of /n which is why it's not working: Martin

Thanks for spotting my error.

Seems to work just great. I like it.

Added the "Test and Debug" license. Made a change so the location and ram array values are side by side seperated by spaces. Much easier to read it this way.
It now looks like this: Here is the new version.