hp1110 problem

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
john_m0ers
Posts: 29
Joined: Wed May 07, 2008 3:41 pm
Location: lincoln
Been thanked: 3 times
Contact:

hp1110 problem

Post by john_m0ers »

Hi,
I've been using fc7 for some time with the eb006 v9. Whilst looking for something else I found four hp1110 project boards that haven't been used.
Tried using them with fc7, but would not program, and said something about some device attached. I could get them to program with mloader 4 that comes with them.
Any ideas please on what I need to do to program these from within fc7
Thanks, john

john_m0ers
Posts: 29
Joined: Wed May 07, 2008 3:41 pm
Location: lincoln
Been thanked: 3 times
Contact:

Re: hp1110 problem

Post by john_m0ers »

Sorry to waste peoples time, it was me having a senior moment, seems I clicked proto board instead of project board..sorry

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: hp1110 problem

Post by Benj »

Glad you've got it working and thanks for letting us know.

Post Reply