FlowCode Crash when using Flowkit V2 with dsPIC30F

A forums to allow bugs and problems with Flowcode v7 to be reported and resolved.

Moderator: Benj

Post Reply
User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

FlowCode Crash when using Flowkit V2 with dsPIC30F

Post by QMESAR »

Hi Team

using Ghost and dsPic30F when pressing the Ghost Run button Flowcode crash don`'t know may be it is the same issue as with PIC32 that Ben mentioned regarding the
.cof file .
hope these issue will be solved soon

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: FlowCode Crash when using Flowkit V2 with dsPIC30F

Post by Benj »

Hello,

I think this problem may already be fixed. Please can you extract the attached files to your "Flowcode 7\compilers\pic16\batchfiles" directory.
batchfiles.zip
(1.1 KiB) Downloaded 191 times
Hopefully then the crash should be resolved, at least on 16-bit PIC devices.

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: FlowCode Crash when using Flowkit V2 with dsPIC30F

Post by QMESAR »

Hi Ben

Thank you very much that has solved the crash issue :D

Just to inform you the Pins that is shown for the ICD incorrect it should be RF2 and RF3 for PGC and PGD
Attachments
1.JPG
1.JPG (27.77 KiB) Viewed 2537 times

Post Reply