I recently upgraded my FC6 to FC7 version
I opened an old program which i created using FC6
I tried to compile the program without making any modifications.
I got the following message during compilation..
Code: Select all
Target folder: Title: Description: Device: PIC.18F.18F4680 Generated by: Flowcode v22.214.171.124 Date: Thursday, April 13, 2017 13:50:39 Users: 1 Registered to: Licence key: NOT FOR COMMERCIAL USE http://www.matrixtsl.com Launching the compiler... C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe --chip=18F4680 MSGDISABLE=359,1273,1388 Microchip MPLAB XC8 C Compiler (Free Mode) V1.41 Build date: Jan 24 2017 Part Support Version: 1.41 Copyright (C) 2017 Microchip Technology Inc. License type: Node Configuration Employing 18F4680 errata work-arounds: * Corrupted fast interrupt shadow registers 38: __config("__PROG_CONFIG", "pic18", 0x4, 0xBB); ^ (1386) unable to determine the semantics of the configuration setting "BBSIZ" for register "CONFIG4L" (warning) . . . . . Memory Summary: Program space used 7740h ( 30528) of 10000h bytes ( 46.6%) Data space used 253h ( 595) of D00h bytes ( 17.9%) Configuration bits used 7h ( 7) of 7h words (100.0%) EEPROM space used 18h ( 24) of 400h bytes ( 2.3%) ID Location space used 0h ( 0) of 8h bytes ( 0.0%) Data stack space used 0h ( 0) of A84h bytes ( 0.0%) You have compiled in FREE mode. Using Omniscient Code Generation that is available in PRO mode, you could have produced up to 60% smaller and 400% faster code. See http://www.microchip.com/MPLABXCcompilers for more information. Launching the linker/assembler... C:\Program Files (x86)\Flowcode 7\tools\DoNothing\DoNothing.exe FINISHED
What is the reason this is happening?
The same program compiled with FC6 gives no warning or errors during compilation.