LED Array Pin Labels

[medelec35]

LED Array pin labels not showing:

LED Array Labels.png

(44.18 KiB) Downloaded 3216 times

I have changed label position to left and sill not showing.

LED 5mm that's also add:
Pin label also does not show when left on the default top.
When changed to any others (left, right Etc) then pin label does appear.

Martin

[Benj]

Hi Martin,

I've looked at these before, these components are rather complicated, much more so then they should be. Something like 5 nested components all with inter related properties and dependencies. They were done in the early days of v6 and basically need ripping up and starting again.

I've made a note to have a proper investigation and try and get these sorted properly.

[Benj]

Right I've had a pass through and think I have fixed the label problems.

Simply extract the attached archive to your "Flowcode 7/components" folder, restart Flowcode and the problems should be fixed.

LED_Labels.zip

(80.93 KiB) Downloaded 257 times

Let me know how you get on.

[medelec35]

Hi Ben, the 5mm LED is perfect!
However the LED array label only now shows at the top.
It does not matter what position the label is showing:

LED Array3.png

(62.15 KiB) Downloaded 3179 times

Unless deliberate?

Martin

[Benj]

Thanks Martin,

Nope not deliberate, investigating now.

[Benj]

Thanks Martin, Good find!

You're right it did have another separate issue, hopefully fixed now.

led_array_pcb.fcpx

(4.39 KiB) Downloaded 254 times

[medelec35]

That's it.
Left and right have been left off.
So if that's intended then working perfectly.

Thanks Ben