Hello,
I'm playing with a 128x32 OLED with SSD1306 driver but in simulation it looks like I can't draw in Y more than 29 pixel.
I would expect to draw a rectangle from 0,0 to 127,31 but in Y I can't see anything above 29. It seems shifted in Y by 2 pixels because the top line is actually at 0,2.
Could you please take a look?
Thanks
Giuseppe
Component gLCD_SSD1306_i2c1
Moderator: Benj
-
- Posts: 71
- Joined: Thu Aug 10, 2017 2:04 pm
- Has thanked: 25 times
- Been thanked: 36 times
- Contact:
Re: Component gLCD_SSD1306_i2c1
I've just noticed that if I set the display Property -> Simulation Mode -> Display Method to Point Cloud instead than Bitmap it works fine!
Then not an issue.
Regards
Giuseppe
Then not an issue.
Regards
Giuseppe
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Component gLCD_SSD1306_i2c1
Hi Giuseppe,
Thanks for letting us know. It appears to be an issue on all graphical LCDs. Maybe the bitmap drawing routine has changed for 7.3. I'll see if I can work out why this has happened.
Anyway this updated GLCD_Base component will fix the simulation problem for the bitmap mode, simply copy the file into your "Flowcode 7/Components" folder and restart Flowcode.
Let us know how you get on.
Thanks for letting us know. It appears to be an issue on all graphical LCDs. Maybe the bitmap drawing routine has changed for 7.3. I'll see if I can work out why this has happened.
Anyway this updated GLCD_Base component will fix the simulation problem for the bitmap mode, simply copy the file into your "Flowcode 7/Components" folder and restart Flowcode.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 71
- Joined: Thu Aug 10, 2017 2:04 pm
- Has thanked: 25 times
- Been thanked: 36 times
- Contact:
Re: Component gLCD_SSD1306_i2c1
Hello Ben,
thanks always for your answers! But, if I remember correctly, it was the same before I upgraded to FC 7.3.
Anyway it's fine now, thank you!
Regards
Giuseppe
thanks always for your answers! But, if I remember correctly, it was the same before I upgraded to FC 7.3.
Anyway it's fine now, thank you!
Regards
Giuseppe