RFID_MFRC522_V2 non remappable?

A forums to allow bugs and problems with Flowcode v7 to be reported and resolved.

Moderator: Benj

electronix
Posts: 58
Joined: Sat Aug 22, 2009 5:45 pm
Has thanked: 17 times
Been thanked: 7 times
Contact:

RFID_MFRC522_V2 non remappable?

Postby electronix » Wed Jan 30, 2019 10:29 am

Hi all.
I recently discovered that the above mentioned component(RFID_MFRC522_V2) is no longer remappable? If I choose for example ch 2 then all com pins are locked to RG6-RG7-RG8. but pin SS and Reset can still be remapped.
My target: 33EP512MU814
Is this a bug or done by purpose?

Best regards

Nick

User avatar
Benj
Matrix Staff
Posts: 14151
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4330 times
Been thanked: 4080 times
Contact:

Re: RFID_MFRC522_V2 non remappable?

Postby Benj » Wed Jan 30, 2019 5:06 pm

Hi Nick,

SPI channel 2 has fixed pins and is not remappable on the 33EP512MU814 device.

This is a limitation of the device silicone rather then a problem with Flowcode. Channels 1, 3 and 4 do have the remappable functionality.
These users thanked the author Benj for the post:
electronix (Wed Jan 30, 2019 9:54 pm)
Rating: 5.56%
 

electronix
Posts: 58
Joined: Sat Aug 22, 2009 5:45 pm
Has thanked: 17 times
Been thanked: 7 times
Contact:

Re: RFID_MFRC522_V2 non remappable?

Postby electronix » Wed Jan 30, 2019 9:54 pm

Hi Ben☺

Thanks for clearing that one so quick for me ☺.

Best regards

Nick
These users thanked the author electronix for the post:
Benj (Thu Jan 31, 2019 12:27 am)
Rating: 5.56%