Mloader problems

A forums to allow bugs and problems with Flowcode v7 to be reported and resolved.

Moderator: Benj

Post Reply
Posts: 6
Joined: Thu Nov 01, 2018 12:27 pm
Location: Lisse NL

Mloader problems

Post by zuidam »

Mloader problem
Arm chip on the EB-031 board
everything works as needed with the FC7 flach.
The same HEX file with only Mloader does not start the ARM chip
after execute.

the EB-031 is visible in the Mloader window.
select AT91SAM7S128

can you help me?

User avatar
Matrix Staff
Posts: 14865
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd

Re: Mloader problems

Post by Benj »

Have you tried clicking the Execute button in mLoader. Otherwise it will hold the board in programming mode.

Closing mLoader should have the same effect.

For the Atmel Arm devices you need to program the .s19 file rather than the .hex file.

Post Reply