ILI9341 gLCD and PIC16F88

An area to discuss 8-bit PIC specific problems and examples

Moderator: Benj

Post Reply
User avatar
Zamphy
Posts: 14
Joined: Sat Sep 26, 2015 11:04 pm
Has thanked: 12 times
Been thanked: 1 time
Contact:

ILI9341 gLCD and PIC16F88

Post by Zamphy »

Test with ILI9341 and 16F88.JPG
Test with ILI9341 and 16F88.JPG (100.66 KiB) Viewed 4647 times
Hi all. Using a simple PIC16F88 (HS, Fast, 19660800 Hz) and the new ILI9341 component (Benj to Jorgen: FEB/01/18 – 11AM).

Not sure which of the six ILI9341 pins above must use level conversion from 5V to 3.3V.
I did it on all of them.
Simulation it´s OK but physical LCD stays dark.

Any clue will be welcome. Thanks.

User avatar
Zamphy
Posts: 14
Joined: Sat Sep 26, 2015 11:04 pm
Has thanked: 12 times
Been thanked: 1 time
Contact:

Re: ILI9341 gLCD and PIC16F88

Post by Zamphy »

Hey ! I continue with that doubt. Which pins in a ILI9341 must be converted from 5V to 3,3V - I converted all them, but I got a messy wires emsemble.
PS: The ILI9341 really works with the humble 16F88, but effectively in a very slow way. Just for experiment !

Post Reply