Flowcode 7 with PICkit 2 for dsPIC33

An area to discuss 16-bit PIC specific problems and examples

Moderator: Benj

Post Reply
Posts: 1
Joined: Fri Apr 28, 2017 6:41 pm

Flowcode 7 with PICkit 2 for dsPIC33

Post by v7chan »


Has anyone managed to program a dsPic33fj64mc802 with a PICkit 2 from inside Flowcode 7?

I can program a 16F84 with a PICkit 2 with no problems. But the dsPIC is giving me problems, it says chip not found. I have to use the PICkit 2 gui to manually load the hex file. Thinking the dsPic33 is not supported in pk2cmd.exe.


User avatar
Matrix Staff
Posts: 15149
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd

Re: Flowcode 7 with PICkit 2 for dsPIC33

Post by Benj »

Hi Vincent,

Yes the PICkit 2 and PK2CMD was a great tool but was pretty limited in what chips it supported. You could try using the PICkit 2 with the new MPLAB X IPE software and see if that works. If it does then you should be able to use the compiler options to allow the Compile to Chip button to automate the process so your not having to load up the IPE software manually.

Post Reply