12f675 20Mhz

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
dhinsa
Posts: 3
Joined: Sun Jun 12, 2011 8:01 pm
Contact:

12f675 20Mhz

Post by dhinsa »

Can anyone tell me how i run the 12f675 program at 20MHZ - I have all the hardware connected up as show in the datasheet just wondered how to let flowcode/microcontroller know the speed to run at - i have changes the options in flowcode, is there a c box that i need to write code in? Im using flowcode 4

Thanks

Spanish_dude
Posts: 594
Joined: Thu Sep 17, 2009 7:52 am
Location: Belgium
Has thanked: 63 times
Been thanked: 102 times
Contact:

Re: 12f675 20Mhz

Post by Spanish_dude »

Check your project options and set the clock to 20MHz, then go to the PIC config and set it to HS external oscillator.

- Nicolas

dhinsa
Posts: 3
Joined: Sun Jun 12, 2011 8:01 pm
Contact:

Re: 12f675 20Mhz

Post by dhinsa »

Thanks i did do that it turned out to be a pin fault on the breadboard!

Thanks for your reply!

Post Reply