DavidA wrote:Hello,
There is a 6.0.7 full release available go to Help >> Check for Updates to get the release.
Hi David,
thank you! Please .. You must in Future decision this as a Theme in Forum.
In Forum stand the Thread "Release
Candidate 6.0.6
Not, that all in this is released in a
There is a 6.0.7 full release available how you wrote..
It is ** insecure.
Is that .. a further release candidate
is now a revision of the Release Candidate 6.0.7
but where was then Candidate 6.0.7? ..
This ** bewilders the user, David,
There is also no revision list.
There is also no list, officially known as thread, which has been cleaned and what not.
...
;-( this is the only what i am not like at FC / and the Staff
...
never is talking together.. ... a update in !! version 6.0.7 !! is !! RELEASED !! ,,,
but in Forum is discussed a Release Candidate !!! 6.0.6 !! ...
..
mhm...
but ok...
i will make this at evenning. I hope i will not regret it, because this 6.0.6 have the "patches" now from benj, martin, jac and yours and is still work ( only the timing and little knowed bugs.. ect. )
i will install for first time at Laptop.. ok. Thank you for your Service!
DavidA wrote:
Here are the String CAL definitions:
String CAL
char FCI_GETCHAR(char* sStr1, char iStr1_len, char iPos);
char FCI_GETLENGTH(char* sStr1, char iStr1_len);
char FCI_MIDSTRING(char* sSrc, char iSrc_len, char* sDst, char iDst_len, char iStart, char iCount);
char FCI_LEFTSTRING(char* sSrc, char iSrc_len, char* sDst, char iDst_len, char iCount);
char FCI_RIGHTSTRING(char* sSrc, char iSrc_len, char* sDst, char iDst_len, char iCount);
char FCI_CONCATENATE(char* sSrc1, char iSrc1_len, char* sSrc2, char iSrc2_len, char* sDst, char iDst_len);
char FCI_TOSTRING(int iSrc1, char* sDst, char iDst_len);
void FCI_TOLOWER(char* sSrc, char iSrc_len, char* sDst, char iDst_len);
void FCI_TOUPPER(char* sSrc, char iSrc_len, char* sDst, char iDst_len);
char FCI_COMPARE(char* sSrc1, char iSrc1_len, char* sSrc2, char iSrc2_len, char iNoCase);
char FCI_FLOAT_TO_STRING(float Number, char Precision, char* String, char MSZ_String);
char FCI_NUMBER_TO_HEX(short Number, char* String, char MSZ_String);
long FCI_STRING_TO_INT(char* String, char MSZ_String);
float FCI_STRING_TO_FLOAT(char* String, char MSZ_String);
char FCI_STRREV(char* sSrc, char iSrc_len, char* sDst, char iDst_len);
char FCI_STRMOV(char* sSrc, char iSrc_len, char* sDst, char iDst_len);
char* FCI_SHEAD(char* sSrc1, char iSrc1_len, char* sSrc2, char iSrc2_len, char* sDst, char iDst_len);
char* FCI_SCOPY(char* sSrc, char iSrc_len, char* sDst, char iDst_len);
Ty but..
I know this CAL David..
but the "declare" for better understanding will be,
what is mean with "sSrc".."sDst"..
ok i can think about.. s=string..Src=Source...s=String..Dst= Destination
but this not allways clear to all user..
char FCI_GETCHAR(char* sStr1, char iStr1_len, char iPos);
..
only example!...
what is mean with the
iPos ?
the IDX ..start with 0
the Letter Pos.. start with 1
...
a docu to this .. a really update DOCU from V5 to V6 was very fine...
and the offline Help in Flowcode V6 again too.
Many Futures are in FC6 new, but only small Helps can read only online...and after ask in Forum..
One Thinking will be fine for the First Moment..
In Wiki the function "Print to Pdf".. so user can make a Handbook every time...
..
David, please understand ... not allways is it allowed in concern from Productive PC // LAptop go to Internet. There a strict rules in R & D departments.. in our "business group" example, is not allowed to use handy ect too...
so how i can get help for read .. if i need...
.. this is a point, if MM Stuff discussed in Future, to decision for a offline help ... will be fine
David,, .. in shool example, in "Final examinations".. "Tests" i hope i declare the right words.. is not allowed to go on online...
but is allowed to use Helpfiles...
DavidA wrote:
We have discussed in the past opening up the CAL documentation, the decision was not to release this to the public initially. If it is something users want then we can revisit the discussion.
Ok - i have noted - that if something users "need" a info - that this can revisit the discussion perhabs to get this Info..
ok david..
i do not want, that FC must be opening like a Book... no ..this is the "Trade secret Of MM " this i accept David - this is normaly..
i only want "more" declare in Help Files.. example this CAL Docu... ..or ...
a HINT...
example:.
If i put a INTERUPT ICON in Flowchart.. ok?..
then i think . at this position the INterrupt will be "active"...
i have test with an "crazy" example.. USBINT0... i know.. if i do this the USB Serial will deactivate with this.. and will not running..
i test only the "doing of FC6"...
so i do not delete the INTERRUPt ICON..
i edit this "Customize CODE C"..
with simple // all.
so i have mean "as a normaly flowchart user"
the INTERRUPT ICON is "deaktive"
i hope you undestand me..
so i am surprise, that the code is not start my USB Serial ...after // all in C Customize Code in Interrupt ICON..
..
Flowcode makes more Code in C WIndow .. as the C Code in INTERUPT ICON is listed..
That have i not know! Because - that is not declare in Help ICON INterrupt
..
i must delete the ICON, if i will "deaktivate" this ...
so my next future request will be "a check box at icons" for active/passive in Flowcharts so user can test more possibles without deletings ICONS and then again make new with all parameters....
with this checkbox option as False.. FC can simualtan "delete" all what FC maked if ICON append.. --as True.. The ICON is activ..
i hope you understand my cross thinking.. i am with yours!!
i really like FC!
---
---
The other Try with siumulation - Martin helped me in this very fine - with updating simple labels at panel in simulation...
... David
... where i can read this doing ... " label1: :text "
http://www.matrixmultimedia.com/mmforum ... 953#p59918
...
FC has many many "hidden and secret functions .."..
..
btw.
this you posted.. is under ../Flowcode 6/CAL
in the File "CAL - Documetation.pdf" with Theme
"Flowcode V5 CAL (Code Abstraction Layer) Docuention
i think this is the same like in FC5 and not up2date with FC6.. because it stand "Flowcode V5 CAL (Code Abstraction Layer) Docuention" not FC6...
DavidA wrote:
As for the potential timing bug, i cannot comment at the moment, 'Ben' our component guy is on holiday for a couple of weeks, i can only postulate as to what the problem maybe.
This is ok David - i will make pause to this. is realy ok. i test others Projects without strictly timings.. .. in this time..
But understand me please,
i make this procedure "Test your Software" on my personally way,
i read shortly at the web and want to go on like a normaly user..
( ok - I could have asked if I can be provided for testing purposes for certain CHIPS FC for disposal ..
I ... did not mean to - I support you with proof of their purchase. I do this because i like this - this is my mean.. )
i saw the conzept and my mean is unbroken, your concept is great and have much much more potential like it is at time -
i am sure - this can be a new "standard" "must to have " in shool, in concern and so on. i will this bring in our concern too... loveley i will do this... i like FC concept.. ok .. simulation is not "my world" but this is a nice future, why not... and this can realtime show in business meetings how the "Project" will work . so i make a Future Request for "standalone Simulation".. for sending by email example to a business partner.. so the business partner can see what he/her get .. ( you know PowerPoint... in this can work to a Chart... and then it can be compiled to a Standalone.. likewise ..) ....
ok..
Best wishes!
Rudi