Page 1 of 1
fingerprint flowcode component?
Posted: Fri Aug 18, 2017 8:47 pm
by ganimides2017
Hi guys!, I´d like to know if there is some fingerprint flowcode component so that can be programed?.
I have Flowcode 6.
Greetings!
Hace a nice weekend
Re: fingerprint flowcode component?
Posted: Sat Aug 19, 2017 8:58 pm
by medelec35
Hi ganimides2017,
There is currently no fingerprint Flowcode component.
This was requested
here for Flowcode V6
Martin
Re: fingerprint flowcode component?
Posted: Mon Aug 21, 2017 4:05 pm
by Benj
Hello,
I'm currently adding new v7 components for Click and Grove modules. I can add this sensor to the list if you like.
https://www.seeedstudio.com/Grove-Finge ... gJQXPD_BwE
Though it's a new development so I'm afraid it's v7 only.
The code I'm going to use to port into Flowcode is available here so you could have a go at porting into v6.
https://raw.githubusercontent.com/Seeed ... ibrary.rar
Re: fingerprint flowcode component?
Posted: Mon Aug 28, 2017 12:29 pm
by JohnCrow
Hi Ben
That going to be interesting, the sensor looks like the one I've bought to use with the Arduino, though mine was branded Adafruit.
Re: fingerprint flowcode component?
Posted: Wed Aug 01, 2018 4:53 pm
by electronix
Does anybody know if the fingerprint sensor, mentioned above, ever were implemented in FC7? Or am I just blind and can´t find it?
Re: fingerprint flowcode component?
Posted: Wed Aug 01, 2018 5:54 pm
by Benj
Hello,
No I never managed to get around to this though I can put it back on the list.
However it's potentially something you can do yourself.
I recently wrote a guide on how to create components using the CAL components as building blocks.
https://www.matrixtsl.com/wiki/index.ph ... Components
Hopefully this should get you started but let us know how you're getting on.
Re: fingerprint flowcode component?
Posted: Thu Aug 02, 2018 8:55 am
by electronix
Hi Ben.
Thanks alot for the quick reply.
I´ll give it a try and post the result here later.
Re: fingerprint flowcode component?
Posted: Thu Aug 02, 2018 10:43 am
by petesmart
Hi,
What fingerprint device are you thinking of?
I just recently purchased a sparkfun device and will have a crack at it shortly...maybe we can do a joint project?
Best
Pete
Re: fingerprint flowcode component?
Posted: Thu Aug 02, 2018 2:09 pm
by mnf
Hi, I wrote and posted a simple component for a fingerprint reader. see:
viewtopic.php?f=66&t=19427
This was for a fairly old scanner & by chance I posted it just before Elektor published an article about the scanners ( and the protocol for the newer model looked very similar). I think I posted the source, but any queries or help I can offer please ask. note there is no support for simulation, so it could be extended to a 'proper' component by someone if needed...
Martin
Re: fingerprint flowcode component?
Posted: Thu Aug 02, 2018 2:26 pm
by mnf
This highlights a possible opportunity for Flowcode ( I'm sure has been mentioned before)
What is needed is a simple way to offer components ( for example take a look at how this is done in Clickteam Fusion 2.5), We need a centrally maintained list of components made easily accessible ( within FC itself rather than trawling the forum)
These could be free or charged for (with the author receiving a percentage of the price). This would give an incentive to write more components and would also help promote Flowcode , whilst discouraging reinvention of the wheel, making programming more productive and fun!
It would help if Matrix could open source some components and document the simulation macros.
Martin
Re: fingerprint flowcode component?
Posted: Thu Aug 02, 2018 3:29 pm
by electronix
Hi all.
Thanks for all the feedback, I´ll try too describe the problem.
I have a client that currently are using an RFID tag/card passage system designed by me and it has been working prettu much ok fore a couple of years, but now the RFID tag/card doesn´t provide a high enough security level anymore, so I need to implement a fingerprint sensor combined with the RFID system, preferably something that can be coded in FC7.
For example: The RFID tag opens a door tied too the person who owns the RFID tag, but to actually use the equipment behind the door I need to be sure that it actually is the right person and not just a stolen or lost RFID tag beeing used by someonelse.
As a part of the problem, I need to store at least 800 fingerprints.
Re: fingerprint flowcode component?
Posted: Thu Aug 02, 2018 5:54 pm
by mnf
As a part of the problem, I need to store at least 800 fingerprints.
- the version I used stored the grand total of 20 fingerprints and the newer version 200 (
https://www.sparkfun.com/products/14518) (Users 1-200 press here Users 201-400 here .....)
The fingerprint 'templates' can be stored remotely and re-loaded to the scanner device from a central store (but I can't think of many benefits other than 'timed' access controls?)
It might be worth investigating something like
https://www.thebarcodewarehouse.co.uk/s ... gLSdfD_BwE - though I couldn't see how many fingerprints this stores (if any - it might pass the processing to the host PC)
Martin