Hi Benj,
First i wish you and the whole team a happy new year 2021.
I have a problem with the ILI9341 with F9. There is confusion between the X and Y axes.
The 0 of X1 is -80 and X2 is 240 (80 + 240 = 320)
It also seems that there is a problem with the SetBackgroundColour macro.
I attach a photo of the display and the flowchart
Thanks in advance for your help
ILI9341
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: ILI9341
Hi corto!
I am not Ben, but, can Maybe help if not, forget this
As far I see, you have to swap the with and high in properties for the display.
And you have to use orientation macro and set orientation to 1 (component macro). After this you may again edit your X and Y pos for "print".
Hope this could help
Br jorgen
I am not Ben, but, can Maybe help if not, forget this
As far I see, you have to swap the with and high in properties for the display.
And you have to use orientation macro and set orientation to 1 (component macro). After this you may again edit your X and Y pos for "print".
Hope this could help
Br jorgen
- Attachments
-
- Swap.PNG (6.54 KiB) Viewed 4359 times
-
- Posts: 28
- Joined: Thu Sep 04, 2014 7:01 am
- Has thanked: 7 times
- Been thanked: 6 times
- Contact:
Re: ILI9341
hello Jorgen,
You are not Ben, but you master well too
you're right, i'm an idiot that i haven't seen this before.
Thank you very much
You are not Ben, but you master well too
you're right, i'm an idiot that i haven't seen this before.
Thank you very much