Build to C code

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
daump
Posts: 2
Joined: Mon Mar 15, 2021 3:21 pm
Contact:

Build to C code

Post by daump »

Hello, I am a new user to Flowcode and working with an existing project given to me from another user. I am trying to export to C but I am receiving some "Unknown or missing component" errors. I suspect the main reason is that in addition to the Chip pack that I have purchased, I need to purchase some feature packs for Comms and Storage.
Partial_Error_List.png
Partial_Error_List.png (208.27 KiB) Viewed 4065 times

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Build to C code

Post by Benj »

Hello,

Yes it looks like your project is missing components. Which version are you using and can you use the 30-day trial.

If you load the project into v9 then you can re-start the free 30-day trial and get access to everything.

daump
Posts: 2
Joined: Mon Mar 15, 2021 3:21 pm
Contact:

Re: Build to C code

Post by daump »

Thanks for your response Benj. I am already using v9 so your suggestion may not be an option for me.

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Build to C code

Post by Benj »

Hello,

I can't solve the FAT problem for you but the RS232 and I2C components can be used for free by using the hidden CAL version of the component. It's not as polished but it might enable you to proceed.
CAL.jpg
CAL.jpg (14.9 KiB) Viewed 4007 times

Post Reply