Flowcode 9 STM Issue

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
Pablito_eskobari
Posts: 1
Joined: Tue May 18, 2021 7:59 am
Contact:

Flowcode 9 STM Issue

Post by Pablito_eskobari »

Hello.
I bought flowcode 9 with all the necessary licenses.
Works on everything except STM.
We bought the program to work on STM.
But it does not compile and does not give me a Hex file.
Please if you can help me

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: Flowcode 9 STM Issue

Post by medelec35 »

Hi, Pablito_eskobar.
I have moved your post , so you want not hijacking a different Topic.
This forum is for Flowcode up to V8
There is a dedicated V9 forum here.
You should be able to log in with your user name and password you used for V9.
If not registered, you can register here.
You will also need to post an example project, along with the .msg.txt that is in the project folder.
Martin

Post Reply