Flow Code HElp file not opening,

[amarsingh12]

Hello Team,

I am trying to use the help section for every component but the when i go to the components and select help nothing happens, I tried to repair the application but no change, And I was looking for some help on the webserver component, Please do something about it,

Also I would like to know,
If we can use this product http://www.embeddedmarket.com/products/ ... et-Module/ with the pic microcontroller to run the webserver.

[JohnCrow]

Hi
Are you running windows 7 by any chance ?

Flowcodes help file format is not supported in windows 7 by default. It still uses the old windows help system type files.
You can download a patch from the microsoft website to re-enable this type of help file.(just do a search for windows help on microsofts site.

Make sure you download the correct one for either 32bit or 64bit operating system.

If this isnt the problem maybe you could explain a bit more what you mean nothing happens.

[Benj]

Hello,

Also I would like to know,
If we can use this product http://www.embeddedmarket.com/products/ ... et-Module/ with the pic microcontroller to run the webserver.

You can use this module but you would have to create code to drive it either from Flowcode or by creating a custom component and writing code in C.

The module we currently use for our TCP/IP and Webserver components is the WIZnet W3100.

[amarsingh12]

Hello TEam,

I have installed the patch and now I can view the help files ... however i can not find the gLCD.hlp file any where, Any way you guys can get me a download link for the same....

I tried a download link from the other post but it does not seem to work any more..

[medelec35]

Is this what you are after?
http://www.matrixmultimedia.com/eblock_ ... .php#EB043

Martin

[amarsingh12]

Thanks martin This helped me fix the problem with the lcd connections,,,

Now the LCD is working fine, Just a lot slow.. but working!!

Just wanted to know if Flowcode v3.6 supports 32 bit pic microcontrollers.. or do I have to upgrade for the same....

[DavidA]

Hello,

Flowcode v3.6 only supports 8bit PIC micros.

We do have a Flowcode v4 for dsPIC/PIC24 which supports 16bit PICmicros, but currently do not support 32bit PIC chips in any form.