SSOP package programing

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
jbs4wd
Posts: 46
Joined: Thu Dec 03, 2009 7:29 am
Has thanked: 4 times
Contact:
Contact jbs4wd

SSOP package programing

Post by jbs4wd »

Does anyone know of a SSOP20 or SOIC20 holder, so as to be able to programm it then solder it onto the board?

Cheers
JOHN
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: SSOP package programing

Post by Benj »

Hi John,

The best way with these devices is to solder the device to the board and then use a Microchip ICSP style connector on the board to interface to a PICkit or EB006 for programming. If you do not already have a ICSP connector on the board then you can probably run wires to each of the pins to allow for programming. Remember to keep the cables short (around 10cm) if you need to do this or the programming will start to fail.

http://ww1.microchip.com/downloads/en/d ... 30277d.pdf
Top
Rosenbaum
Flowcode V4 User
Posts: 25
Joined: Thu Feb 22, 2007 3:20 pm
Has thanked: 1 time
Been thanked: 5 times
Contact:
Contact Rosenbaum

Re: SSOP package programing

Post by Rosenbaum »

There are diffrent ways:
ssop:
http://de.farnell.com/wells-cti/656c120 ... dp/9897623
sop:
http://de.farnell.com/wells-cti/652d020 ... dp/9897658
http://de.farnell.com/3m/923665-28/stec ... dp/1654361
http://de.farnell.com/3m/216-7224-55-19 ... dp/1654359

Easy Ways, but not cheap.
Top
Post Reply

Return to “General Programming”