Start ARM Flowcode

An area to discuss ARM specific problems and examples

Moderator: Benj

Post Reply
mnf
Valued Contributor
Valued Contributor
Posts: 1188
Joined: Wed May 31, 2017 11:57 am
Has thanked: 70 times
Been thanked: 439 times
Contact:

Start ARM Flowcode

Post by mnf »

Tempted to dip a toe into ARM programming - and looking for some recommendations for a cheap setup.

For example
https://www.banggood.com/ARM-Cortex-M3- ... rehouse=CN

or

https://www.banggood.com/3Pcs-STM32F103 ... rehouse=CN

Would seem to fit the bill - certainly cheap and seem to be supported by the ARM processor pack - but does anyone have any exeprience with these boards. Do I need any 'extras' to use them from within FC (for example https://www.banggood.com/3_3V-5V-XTW-ST ... rehouse=CN)

Any comments as to suitability, or suggestions to alternatives gratefully received.

Martin

Post Reply