Hi Rod.
I have tried your flowchart with EPIO40P which also uses 33EP256MU806 and it's working as expected.
With analogue i/p connected to the + supply, my logic Analyser showed:
What connection have you got the analogue voltage connected to on your BL0032 & can you measure the voltage with DMM?
UART Component - USB-UART FT232RL hardware
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
-
- Posts: 96
- Joined: Fri Jul 15, 2016 10:51 am
- Has thanked: 24 times
- Been thanked: 5 times
- Contact:
Re: UART Component - USB-UART FT232RL hardware
Hi Martin, I dont know If I made myself clear, but what i was trying to explain on my last post is: I cant get the uart comm to read the analog changing while using flowcode.
On the other side, while I use a third party for example mikroe uart, iam able to read the analog changing through Uart.
Thank
Rod
On the other side, while I use a third party for example mikroe uart, iam able to read the analog changing through Uart.
Thank
Rod
- Attachments
-
- IMG_20220128_151957.jpg (90.28 KiB) Viewed 1596 times
-
- IMG_20220128_151948.jpg (138.68 KiB) Viewed 1596 times
-
- Analog_Output_Pot.jpg (88.86 KiB) Viewed 1596 times