Pure Sine Wave Inverter

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
Derrihj
Posts: 218
Joined: Mon Jul 09, 2018 12:43 pm
Contact:

Pure Sine Wave Inverter

Post by Derrihj »

Hi friends is there anyone here that has an idea of how to make pure sine wave inverter in flowcode 8 things of sine table I totally have no idea how to start and end please share anyone with an idea on how to code pure sine wave oscillator

User avatar
STibor
Posts: 263
Joined: Fri Dec 16, 2011 3:20 pm
Contact:

Re: Pure Sine Wave Inverter

Post by STibor »

Hello,

Component: Frequency Generator (DSP)
Basic Sine Wave Generator:https://www.matrixtsl.com/wiki/index.ph ... ator_(DSP)

Derrihj
Posts: 218
Joined: Mon Jul 09, 2018 12:43 pm
Contact:

Re: Pure Sine Wave Inverter

Post by Derrihj »

Thanks STibor but i need a live example for slow learners.

User avatar
Steve001
Valued Contributor
Valued Contributor
Posts: 1149
Joined: Wed Dec 31, 2008 3:37 pm
Contact:

Re: Pure Sine Wave Inverter

Post by Steve001 »

Hi Derrihj

Have you tried a google search "microchip inverter reference design"

https://www.google.com/search?q=microch ... e&ie=UTF-8

they are quite well documented and contain lots of information

Steve
Success always occurs in private and failure in full view.

Derrihj
Posts: 218
Joined: Mon Jul 09, 2018 12:43 pm
Contact:

Re: Pure Sine Wave Inverter

Post by Derrihj »

Guys how to obtain a sine table of 32 values in flowcode? Please help really need help on this and how to implement SPWM inverter.

User avatar
Benj
Matrix Staff
Posts: 14865
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Pure Sine Wave Inverter

Post by Benj »

Hello,

Hopefully this should help. Currently the scaling is for a 16-bit signed int and will go between -32767 and 32767. If you need to change this to an unsigned value then I can provide an example for this too.
SineGen.fcfx
(11 KiB) Downloaded 153 times

Derrihj
Posts: 218
Joined: Mon Jul 09, 2018 12:43 pm
Contact:

Re: Pure Sine Wave Inverter

Post by Derrihj »

Thanks Benj but is this possible for you to provide this as a full complete spwm dc- ac inverter project with feed back say by having different sets of sine table with each having may be 32 values for different duty percentage values may be starting at lower duty of may be 65 percent when the inverter is first switched on then goes on increasing duty until the desired output is achieved say may be 220vac ,230vac or 240vac? we want to see how this is done in flowcode completly because we want to shift to flowcode since its easy to use than others.We want this to have 4 siginals ,that is 2 high and 2 low siginals to be fed to two IR2110 driver ICs.I dont know exactly how to bring out this clearly but i guess you get what am trying to say.THanks sir.

User avatar
Benj
Matrix Staff
Posts: 14865
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Pure Sine Wave Inverter

Post by Benj »

Hello,

It's probably easier if you generate one sine wave at full scale and then use say the DSP scale component to allow you to dynamically scale the wave. You could maybe use the DSP control component to provide PID type feedback processing for the scaler.

Derrihj
Posts: 218
Joined: Mon Jul 09, 2018 12:43 pm
Contact:

Re: Pure Sine Wave Inverter

Post by Derrihj »

Thanks Benj but Guys, i totally don't know how to do this which is why am requesting for a complete project if that is possible then discus where i get lost from which i think is the best way to learn especially for slow learners like me thanks guys.

DCW
Posts: 64
Joined: Mon Sep 28, 2015 8:19 pm
Contact:

Re: Pure Sine Wave Inverter

Post by DCW »

Hello there... well now I believe that flowcode 8... has a facility whereby you can type in C-code ... and then it will.. 'create' flowchart (flowcode code) symbols...!!

So now if you go look on the internet.. and look for a brilliant indian fellow called - Tahmid - he has a brilliant working model, of a SINE wave inverter, that will not be too difficult to get around.

I studied it at length, and it seems very do-able... So buddy.. go check him out... Tahmid did it real nicely..

Ask Benj - to help you.. with procedure for creating flowcode - from C-code..

I sure it will work..

regards .. DCW ...

Derrihj
Posts: 218
Joined: Mon Jul 09, 2018 12:43 pm
Contact:

Re: Pure Sine Wave Inverter

Post by Derrihj »

Thanks DCW yes i know that guy Tahmid i my self been using him for some time and he has been so helpful in my smp inverter research and about flowcode i think it cant translate all the C code directly into flow-chat maybe Benj can come in and help us out. My only worry is how do we get Benj visit Tahmid page look at the sine wave project there and translate it into flow code

Post Reply