Hi All
Hopefully the whole matrixmultimedia family is good.
Does FLOWCODE 8 support the PYD1798 Digital PIR component?
https://img.ozdisan.com/ETicaret_Dosya/ ... 854121.pdf
EBM012 or Groove PIR Motion which sensor is also used.
Thanks advance
PYD1798 Digital PIR Motion Sensor
Moderator: Benj
- celebriums
- Posts: 125
- Joined: Sun Sep 25, 2016 3:50 pm
- Has thanked: 71 times
- Been thanked: 33 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PYD1798 Digital PIR Motion Sensor
Hello Sadik,
We use this PIR sensor on the EBM012 board.
https://www.rapidonline.com/nicera-re20 ... or-61-1466
We use an op amp to process the signal and provide a digital signal the MCU can read using a standard digital input pin.
The PYD1798 looks like it may have the signal processing unit inside the PIR sensor itself and so yes it should be compatible with Flowcode as is.
We use this PIR sensor on the EBM012 board.
https://www.rapidonline.com/nicera-re20 ... or-61-1466
We use an op amp to process the signal and provide a digital signal the MCU can read using a standard digital input pin.
The PYD1798 looks like it may have the signal processing unit inside the PIR sensor itself and so yes it should be compatible with Flowcode as is.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel