Hi Ben
On my board(Pic32MZ) I have a spi port and an interrupt pin. Both is working but not as I expect.
I add a small connector to all this pins, so there are avaible for an additional digital analyzer hardware.
Is it possible to use Flowkit 2 as ghost or as an oscilloscope to control the port of my board?
I saw some products by RS Components but not the flowkit 2.
Maybe RS components should expand their assortment.
https://uk.rs-online.com/web/c/?searchT ... -solutions
regards
Stefan
Flowkit 2 for Ghost?
Moderator: Benj
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact: