Page 1 of 1

SCADA and PC networkcard

Posted: Mon Jan 20, 2020 11:18 am
by stefan.erni
Hi Ben

Is it possible to use NetworkComms component with the PC networkcard in SCADA?

regards

Stefan

Re: SCADA and PC networkcard

Posted: Mon Jan 20, 2020 11:36 am
by Benj
Hello Stefan,

Yes this should work fine, embedded mode simulation should also work :D

Here's an example to get you started.
https://www.matrixtsl.com/wiki/index.php?title=Component:_BBC_Weather_Forecast_(Comms:_IoT/Cloud)

Before running, select the Network comms component and provide a property setting for the Network Interface.

Let us know how you get on.

Re: SCADA and PC networkcard

Posted: Mon Jan 20, 2020 3:57 pm
by stefan.erni
Hi Ben

Yes it is working. Scada has also recognized my 5 network cards and I can simply select card 4 and it connects the network card where the Microchip Board is plugged in. PERFECT !
Ok I have to program the correct socket connection now ….

regards

Stefan


scada_net.PNG
scada_net.PNG (21.92 KiB) Viewed 333 times

Re: SCADA and PC networkcard

Posted: Mon Jan 20, 2020 5:09 pm
by Benj
Great, glad it's working well for you. 5 network cards sounds interesting :wink:

Let us know how you're getting on with talking to the board.

Re: SCADA and PC networkcard

Posted: Wed Jan 22, 2020 9:55 am
by stefan.erni
Hi Ben

5 network cards sounds interesting



To record a 3D movement track you need 3 fast cameras. One for each axis( X, Y, Z). These cameras mostly have a GIGE interface, which is about 1Giga-lan. Each camera needs a network connection to transfer the data for 80,000 lines with 2000 pixels per second. No problem, there are 4 channel network cards for a good price.
1. Card for X-Camera
2. Card for Y-Camera
3. Card for Z-Camera
4. Card for synchronise Led's (with a PIC32)
5. Card to use Internet to go to the Matrix forum

regards

Stefan
dalsa.PNG
dalsa.PNG (292.21 KiB) Viewed 287 times

LAN-Card.PNG
LAN-Card.PNG (58.56 KiB) Viewed 287 times

Re: SCADA and PC networkcard

Posted: Wed Jan 22, 2020 10:43 am
by Benj
That sounds even more interesting! The cameras sound impressive.

Is that for motion capture or VR type stuff?

Re: SCADA and PC networkcard

Posted: Wed Jan 22, 2020 4:46 pm
by stefan.erni
Hi Ben

It's motion capture from teeth and bones.

regards

Stefan

3D-Motion.PNG
3D-Motion.PNG (194.94 KiB) Viewed 273 times