Hi guys,
Trust everyone is OK and safe these days.
Does FC8 support a 96x32 pixel OLED display with SSD1316 controller? Would I not be able to use the SSD1306 I2C component and adapt it in some way?
Thanks for your thoughts!
R
96x32 OLED SSD1316 I2C Supported?
Moderator: Benj
-
- Posts: 139
- Joined: Tue Jan 05, 2010 10:07 am
- Has thanked: 20 times
- Been thanked: 25 times
- Contact:
-
- Posts: 139
- Joined: Tue Jan 05, 2010 10:07 am
- Has thanked: 20 times
- Been thanked: 25 times
- Contact:
-
- Valued Contributor
- Posts: 1188
- Joined: Wed May 31, 2017 11:57 am
- Has thanked: 70 times
- Been thanked: 439 times
- Contact:
Re: 96x32 OLED SSD1316 I2C Supported?
If you send me one of the displays I'll have a go....
Just been doing a st7789 (spi) display - which works (at least on some displays )
The source for the ssd1306 has been published and it shouldn't be too hard to modify for the different resolution..
Martin
Just been doing a st7789 (spi) display - which works (at least on some displays )
The source for the ssd1306 has been published and it shouldn't be too hard to modify for the different resolution..
Martin
-
- Posts: 2
- Joined: Wed Dec 12, 2018 3:31 pm
- Contact:
Re: 96x32 OLED SSD1316 I2C Supported?
Devi solo cambiare il numero dei pixel da standard a 96 x 32 dal pannello properties.
Io ho provato cambiando la risoluzione standard a 128 x 32 e basta stampare i caratteri calcolando i pixel scritti.
Comunque il componente SSD 1306 I2C funziona correttamente anche con setting di risoluzione diversi ( nel mio caso 128 x 32 )...
Saluti e ovviamente
traduce with google traslator.
Solozerouno.
Io ho provato cambiando la risoluzione standard a 128 x 32 e basta stampare i caratteri calcolando i pixel scritti.
Comunque il componente SSD 1306 I2C funziona correttamente anche con setting di risoluzione diversi ( nel mio caso 128 x 32 )...
Saluti e ovviamente
traduce with google traslator.
Solozerouno.