Script Syntax Error
Moderator: Benj
Script Syntax Error
Got to a point programming this project where it refused to work. so, scrapped it and started again with the same result, then this popped up on the screen?
Any help gratefully received.
Stylo
- Attachments
-
- 4Ch_Light_Engine_16_6_20..fcfx
- (21.52 KiB) Downloaded 164 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: Script Syntax Error
Hi Stylo,
That is not an error with your project so just click No to remove the popup.
The issue is caused due to problems with our server, which is currently undergoing updates and fixes.
Sorry for the confusion caused, hopefully all will be resolved soon.
That is not an error with your project so just click No to remove the popup.
The issue is caused due to problems with our server, which is currently undergoing updates and fixes.
Sorry for the confusion caused, hopefully all will be resolved soon.
Re: Script Syntax Error
Hi Leigh
Thanks for the prompt reply,
I will divert to some of the domestic chores waiting for my attention.
I presume you will let us know when the problem is fixed.
Regards
Stylo
Thanks for the prompt reply,
I will divert to some of the domestic chores waiting for my attention.
I presume you will let us know when the problem is fixed.
Regards
Stylo
- Steve
- Matrix Staff
- Posts: 3422
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Script Syntax Error
That "script error" occurs when Flowcode has a problem trying to contact our website (e.g. when checking for updates). It should not cause a problem with your project, so there must be something else wrong with it.
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Script Syntax Error
Hi Steve,
Can the check for updates be changed to be done once at program startup and not every time I save a flowchart?
Best regards,
Jac
Can the check for updates be changed to be done once at program startup and not every time I save a flowchart?
Best regards,
Jac
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- Steve
- Matrix Staff
- Posts: 3422
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Script Syntax Error
Hi Jac,
I think the intention is to avoid a large volume of internet traffic where everything is checked, so Flowcode just checks for the currently used objects.
Normally, this shouldn't be a problem and it would be unobtrusive.
The recent problem with our website going down has highlighted that Flowcode throws that error each time it tries (and fails) to get information from the website. I think the real problem is that this error is being reported to the user. Instead, Flowcode should silently detect that the website is unavailable and, for example, show a local version of the welcome page or prevent checks for available updates.
At the same time, I will look into how we can improve how Flowcode communicates with the internet whilst still providing up-to-date information on updates, etc.
Regards,
Steve.
I think the intention is to avoid a large volume of internet traffic where everything is checked, so Flowcode just checks for the currently used objects.
Normally, this shouldn't be a problem and it would be unobtrusive.
The recent problem with our website going down has highlighted that Flowcode throws that error each time it tries (and fails) to get information from the website. I think the real problem is that this error is being reported to the user. Instead, Flowcode should silently detect that the website is unavailable and, for example, show a local version of the welcome page or prevent checks for available updates.
At the same time, I will look into how we can improve how Flowcode communicates with the internet whilst still providing up-to-date information on updates, etc.
Regards,
Steve.
- AbhijitR
- Posts: 299
- Joined: Fri Nov 07, 2014 12:48 pm
- Location: Pune, India
- Has thanked: 280 times
- Been thanked: 79 times
- Contact:
Re: Script Syntax Error
Hello! Steve
good afternoon
The Script Error pops every time i try to save the project, i read above post so not worried just want to put to notice.
Abhi
good afternoon
The Script Error pops every time i try to save the project, i read above post so not worried just want to put to notice.
Abhi