Hello
How to set up 74HC595 in this circuit with the Flowcode?
like this
is it possible؟
74HC959 guidance
Moderator: Benj
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: 74HC959 guidance
Hi RABO!
In FC8 Ben create a component for the display build up around the 75hc595 Work perfect(suppose it this chip you mean this is you mean).
have a look here:
viewtopic.php?f=78&t=21826&p=99637&hilit=74hc595#p99637
Hope this help
Br jorgen
In FC8 Ben create a component for the display build up around the 75hc595 Work perfect(suppose it this chip you mean this is you mean).
have a look here:
viewtopic.php?f=78&t=21826&p=99637&hilit=74hc595#p99637
Hope this help
Br jorgen
-
- Posts: 41
- Joined: Sun Mar 01, 2020 1:39 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: 74HC959 guidance
Hi jorgen.
Thanks for the tips.
In the real world, a chip is needed to set up every 7 segments.
Like the bottom circuit:
But I want to start the 4x7 segment with two chips.
Thanks for the tips.
In the real world, a chip is needed to set up every 7 segments.
Like the bottom circuit:
But I want to start the 4x7 segment with two chips.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: 74HC959 guidance
Hello,
Let us know how you're getting on.
Yes it's possible but you will need to make your own macros to toggle the pins in the correct way to output the codes you need specific to your hardware setup. Should be fairly straightforward.is it possible؟
Let us know how you're getting on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 41
- Joined: Sun Mar 01, 2020 1:39 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: 74HC959 guidance
Hi Ben
Thanks for the reply.
Unfortunately, I'm a beginner in Flowcode(Of course, the flowcode is amazing).
And I was only able to design the upper circuit.
please guide me
Thanks for the reply.
Unfortunately, I'm a beginner in Flowcode(Of course, the flowcode is amazing).
And I was only able to design the upper circuit.
please guide me