CAN Send Issues 18F25K80

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
hoozamawhatsit
Posts: 7
Joined: Sat Apr 11, 2020 3:58 pm
Location: Blue Mountains, Australia
Contact:

CAN Send Issues 18F25K80

Post by hoozamawhatsit »

Hi All,

I am having issues sending CAN using 18F25K80(have also used 18F26K80 same chip family)

I have checked all hardware everything is working except CAN send
I've changed chip configurations and clock speeds to see if it had any change but no luck....

I have made a simple program where i send CAN messages with LEDs on portA showing the program stepping through plus a few buttons that will send CAN as well.

Still no luck, i'm now thinking it's FC related.

Any help on this would be greatly appreciated

Thanks,
Mick
Attachments
CAN_DCP_25K80_vTESTTXONLY.fcfx
(17.81 KiB) Downloaded 218 times

Post Reply