BL0136 - Component issue

Moderator: Benj

Post Reply
User avatar
petesmart
Valued Contributor
Valued Contributor
Posts: 395
Joined: Thu May 06, 2010 11:42 am
Location: Sydney, Australia
Contact:

BL0136 - Component issue

Post by petesmart »

Hi Ben,

I have been doing some more testing on the BL0136 component...

In addition to the simulation issue that I described in a previous post viewtopic.php?f=78&t=20260, I found another odd problem.

When requesting the IP address using the CheckTCPServerIP macro on the hardware it returns the MAC address rather than the expected IP address. The odd thing I observed is that when simulating in ICD mode both the hardware and the simulation shows the correct IP addres :?: s - this is on the LCD display and simulation debugger panel.

Test program attached
bl0136 test.fcfx
(20.84 KiB) Downloaded 80 times
Best

Pete
sorry about that Chief!

User avatar
Benj
Matrix Staff
Posts: 15045
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: BL0136 - Component issue

Post by Benj »

Hi Pete,

Hmm same for me, I'll look into this for you.

Edit .. Should be fixed now. :D

User avatar
petesmart
Valued Contributor
Valued Contributor
Posts: 395
Joined: Thu May 06, 2010 11:42 am
Location: Sydney, Australia
Contact:

Re: BL0136 - Component issue

Post by petesmart »

Hi Ben,

Component now doing as it should... thanks.

Please see previous topic - simulation is still broken...

Best

Pete
sorry about that Chief!

User avatar
petesmart
Valued Contributor
Valued Contributor
Posts: 395
Joined: Thu May 06, 2010 11:42 am
Location: Sydney, Australia
Contact:

Re: BL0136 - Component issue

Post by petesmart »

We are getting closer Ben,

I have sent you a PM wit the details

best

Pete
sorry about that Chief!

Post Reply