SPI Hardware & Software 18F47K40

[medelec35]

Using these settings for SPI:

SPI Properties.png

(51.62 KiB) Downloaded 1342 times

No data output at all on any pins channel1 (channel 2 not tested).

Software mode:
No data on either enable or MISO.
Data present on clock and MOSI

Using external osc @ 20MHZ.
1ms pulse within a loop is correct.
I can PM project if required.

[medelec35]

Channel 2 is not working either

[Benj]

Hi Martin,

Hopefully now found, fixed and rolled out for the whole family

Also available via the update system now.

[medelec35]

Thanks, Ben,
That's Great!
Will give you an update on the results after testing tomorrow.

[medelec35]

Hi Ben,
All working with channel 1 and software.
Not tested with CH2, assuming to work as well.
Thank you