When AT89S52 uses the serial port (with USB to serial cable) to download the program, which download software is used?
STC MCU has download programs corresponding to each MCU on its official website, such as STC_ISP_V488. What is the use of AT89S52? My laptop does not have a parallel port.
Introduction of AT89S52: https://www.utmel.com/components/at89s5 ... eet?id=600
Which download software to use?
-
- Posts: 444
- Joined: Tue Apr 15, 2014 4:19 pm
- Location: Kajaani, Finland
- Has thanked: 345 times
- Been thanked: 227 times
- Contact:
Re: Which download software to use?
We use Atmel Flip 2.4.4 to load software into AT89C series MCU's. Might still be available somewhere in the Microchip site still. Program is ancient and has its quirks.
2.4.6 was not working correctly for us for some reason.
The AT89 series has bootloader that is inside the chip from factory.
2.4.6 was not working correctly for us for some reason.
The AT89 series has bootloader that is inside the chip from factory.
Ill just keep the good work up!