Flowcode V3 & PIC12F510

Forum for problems or queries regarding the Flowcode application and compiler usage.

Moderators: Benj, Mods

Post Reply
mfun
Posts: 15
Joined: Tue Sep 30, 2008 3:06 pm
Contact:

Flowcode V3 & PIC12F510

Post by mfun »

Hello,

Why is a PIC12F510 offered as a target in V3, but not supported under configuration?
Regards,

Mike

User avatar
Benj
Matrix Staff
Posts: 14835
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode V3 & PIC12F510

Post by Benj »

Hello Mike

Which version of Flowcode are you using? As far as im aware the 12F510 device was removed from Flowcode a long time ago. BoostC has even dropped it from its supported device list.

mfun
Posts: 15
Joined: Tue Sep 30, 2008 3:06 pm
Contact:

Re: Flowcode V3 & PIC12F510

Post by mfun »

Hi Benj,
As I stated earlier...(twice)- V3 is the version.
It is still listed as a possible target.
Regards,
Mike

User avatar
Benj
Matrix Staff
Posts: 14835
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode V3 & PIC12F510

Post by Benj »

Hello Mike

Sorry which version of V3. Eg 3.0, 3.1, 3.4, 3.6, etc.

V3.6 can be downloaded from here if you are using an older version.
http://www.matrixmultimedia.com/Flowcode3a-X.php

Post Reply