Microcontroller Systems Engineering with Flowcode

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

jkunzmann3251
Posts: 3
Joined: Wed Jul 23, 2014 10:49 pm
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by jkunzmann3251 »

Help…Unable to find comprehensive information on how to implement Look Up Table in Version 5. I do know about the Supplemental Code window via Build Menu and Project Options. Nevertheless, there is no information about what goes into Definitions and or the Implementation window. There were references on the forum with links, but the links are not working. I would appreciate a simple example for reference and appropriate syntax. Greatly appreciated in advance!!! Joe K

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by medelec35 »

Hi Joe,
Here are a couple of links to LUT tutorials:
http://www.matrixtsl.com/mmforums/viewt ... 26&t=10066
&
http://www.matrixtsl.com/mmforums/viewt ... 69&p=35960

For more links, just enter LUT in the search window.

Martin
Martin

dazz
Posts: 1314
Joined: Sun Jan 15, 2012 3:15 pm
Has thanked: 474 times
Been thanked: 458 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by dazz »

jkunzmann3251 wrote:Help…Unable to find comprehensive information on how to implement Look Up Table in Version 5. I do know about the Supplemental Code window via Build Menu and Project Options. Nevertheless, there is no information about what goes into Definitions and or the Implementation window. There were references on the forum with links, but the links are not working. I would appreciate a simple example for reference and appropriate syntax. Greatly appreciated in advance!!! Joe K
Hi
As you are using V5 can you follow the link in my sig and sign up for the V5 forums, as this is in the v2 forums

Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php

Post Reply