v5 lcd programlama ok ama v6 lcd programlama hata problem nerde çözemedim flowcode 7 aynı programı yazıyorum hata isis programında hata gerçekte hata
benim için versiyon önemli flowcode v6 16f628a seri iletişim lcd ekrana baglama çözemedim
ben yeni ve ögrenmek ve türkiyede baylaşmak ama kaynak yok bilgi yok egitim yok bizlere lisans flowcode v 6 ve v 7 bizler için çok pahalı çooooook para deneme için
bu problemler sizler için basit olabilir yada teknik bir problem en basit lcd çalışmadı hata verdi
lcd 16*2 kulanmak
Moderator: Benj
lcd 16*2 kulanmak
- Attachments
-
- Flowcode1.fcf
- lcd ve rs232 kontrol hata nerede ben anlamadım
- (9 KiB) Downloaded 301 times
-
- 16F628A.rar
- ısıs
- (19.32 KiB) Downloaded 294 times
-
- Flowcode1.fcf
- flowcode 6 ve flowcode 7 ısıs hata gerçekte hata sadece lcd ekran için
- (6.5 KiB) Downloaded 300 times
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: lcd 16*2 kulanmak
güzel tespit deneme için bir zaman
ilgi için çok teşekkürler
ben 16f628a için 4mhz dahili osilotör için INTOSC-CLKOUT SEÇTİM
ilgi için çok teşekkürler
ben 16f628a için 4mhz dahili osilotör için INTOSC-CLKOUT SEÇTİM
Re: lcd 16*2 kulanmak
süpeeeeeeeeeeeeerrrrrrrrrrrrrrrrrrrrrr.....................
çalışıyor hiç bir sorun yok gerçekte çalışıyor ısıs de çalışıyor ok
çalışıyor hiç bir sorun yok gerçekte çalışıyor ısıs de çalışıyor ok
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: lcd 16*2 kulanmak
Please use English in this part of the forum. Or at least include a google translated version of youressage.
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis