PIC18f2553 RA6

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

alanwms
Posts: 56
Joined: Tue Sep 16, 2008 2:09 pm
Location: Minnesota USA
Has thanked: 4 times
Been thanked: 17 times
Contact:

PIC18f2553 RA6

Postby alanwms » Fri Sep 14, 2018 12:54 am

Could you help me with -

The data manual for the pic18f2553 indicates that RA6 is I/O for general purpose I/O. When I try to output to that pin, only 0 through 5 are in the selection. I'm using internal oscillators, and tried multiple selections (I think there are only 4).

Can you direct me? Is this a configuration issue or has FC7 got an issue?
Attachments
RA6.jpg
RA6.jpg (41.72 KiB) Viewed 1425 times

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8802
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2549 times
Been thanked: 3704 times
Contact:

Re: PIC18f2553 RA6

Postby medelec35 » Fri Sep 14, 2018 9:20 am

Hi, as an unofficial fix, can you try with the attached file.
Drop into your Flowcode7 installation \FCD\PIC directory then reload flowchart.
Attachments
18F2553.fcdx
(27.48 KiB) Downloaded 49 times
These users thanked the author medelec35 for the post:
Benj (Fri Sep 14, 2018 8:59 pm)
Rating: 5%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.

alanwms
Posts: 56
Joined: Tue Sep 16, 2008 2:09 pm
Location: Minnesota USA
Has thanked: 4 times
Been thanked: 17 times
Contact:

Re: PIC18f2553 RA6

Postby alanwms » Fri Sep 14, 2018 3:02 pm

I will look into doing that over the weekend, can I instead change the icon code to reflect the port number?

alanwms
Posts: 56
Joined: Tue Sep 16, 2008 2:09 pm
Location: Minnesota USA
Has thanked: 4 times
Been thanked: 17 times
Contact:

Re: PIC18f2553 RA6

Postby alanwms » Fri Sep 14, 2018 3:09 pm

I renamed the old file, and copied your file into the directory. Relaunched FC7 and now I get to select A6 as an output.

Thanks for this.
These users thanked the author alanwms for the post:
Benj (Fri Sep 14, 2018 8:59 pm)
Rating: 5%
 

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8802
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2549 times
Been thanked: 3704 times
Contact:

Re: PIC18f2553 RA6

Postby medelec35 » Fri Sep 14, 2018 3:11 pm

You're welcome.
Hope it works on hardware for you.

Thank for letting us know.
These users thanked the author medelec35 for the post:
alanwms (Fri Sep 14, 2018 9:24 pm)
Rating: 5%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.