RFID_MFRC522_V2 non remappable?

A forums to allow bugs and problems with Flowcode v7 to be reported and resolved.

Moderator: Benj

Post Reply
electronix
Posts: 58
Joined: Sat Aug 22, 2009 5:45 pm
Has thanked: 17 times
Been thanked: 7 times
Contact:

RFID_MFRC522_V2 non remappable?

Post by electronix »

Hi all.
I recently discovered that the above mentioned component(RFID_MFRC522_V2) is no longer remappable? If I choose for example ch 2 then all com pins are locked to RG6-RG7-RG8. but pin SS and Reset can still be remapped.
My target: 33EP512MU814
Is this a bug or done by purpose?

Best regards

Nick

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: RFID_MFRC522_V2 non remappable?

Post by Benj »

Hi Nick,

SPI channel 2 has fixed pins and is not remappable on the 33EP512MU814 device.

This is a limitation of the device silicone rather then a problem with Flowcode. Channels 1, 3 and 4 do have the remappable functionality.

electronix
Posts: 58
Joined: Sat Aug 22, 2009 5:45 pm
Has thanked: 17 times
Been thanked: 7 times
Contact:

Re: RFID_MFRC522_V2 non remappable?

Post by electronix »

Hi Ben☺

Thanks for clearing that one so quick for me ☺.

Best regards

Nick

Post Reply