Downstream - BL0106 - Click - Component Request

Moderator: Benj

Post Reply
r_teixeir
Posts: 96
Joined: Fri Jul 15, 2016 10:51 am
Has thanked: 24 times
Been thanked: 5 times
Contact:

Downstream - BL0106 - Click - Component Request

Post by r_teixeir »

Hello guys,
Any chance for requesting the creation of the BL0106 component?

That would be nice

Thanks

Rod
Attachments
BL0106.jpg
BL0106.jpg (135.88 KiB) Viewed 4324 times

kersing
Valued Contributor
Valued Contributor
Posts: 2045
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 553 times
Been thanked: 1081 times
Contact:

Re: Downstream - BL0106 - Click - Component Request

Post by kersing »

The BL0106 itself is passive. Any components would need to be created for the click inserted into it. Which click do you want to use?
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis

r_teixeir
Posts: 96
Joined: Fri Jul 15, 2016 10:51 am
Has thanked: 24 times
Been thanked: 5 times
Contact:

Re: Downstream - BL0106 - Click - Component Request

Post by r_teixeir »

Hi Kersing thanks for replying. Iam trying to do the motor training(Matrixtsl) at home with the following hardware:

- DSpic BL-0032
- Sensor board EB067 (Potentiometer). Connected on PORTB(0-7). Using the AN03
- BL0114 (Lcd and Potentiometer). Connected on PORTB(8-15) and PORTD(0-7). For LCD, I am using PORTD(0-5), and for the 2nd potentiometer(AN9).
- BL0106(Click from Matrix), iam using (one) ShuttleClick(mikroe) and (02) mikroBus Shuttle. (in the first shuttle I am using the DC motor 4 click), and on the 2nd shuttle, Iam using the expand click. These are the clicks that iam interested on.

Problem: I read a past post related to a PWM Pin PORTE.6, and considering that I am using the click boards in SPI, the PWM pin in click board is Pin6.viewtopic.php?f=69&t=20398&p=90229&hilit=pwm+RE6, So Iam facing problem now.

I've already got the first speedControl-basic program working with one potentiometer and the right pins for PWM(RD6) on the click(Without using the shuttles). But when I add another pot,and try to remape the available analog pins withing th BL032, the only port that I can use is PortE with no RE6.
I attached the First program SpeedControl-Basic that is working great. And I attached 2 other pictures with shuttle clicks.

If you need anyother info, let me know

Thanks

Rod
Attachments
1. SpeedControl-Basic.fcfx
(15.68 KiB) Downloaded 202 times
2. SpeedControl-Feedback.fcfx
(19.16 KiB) Downloaded 195 times
Motor_Clicks.jpg
Motor_Clicks.jpg (135.36 KiB) Viewed 4317 times

r_teixeir
Posts: 96
Joined: Fri Jul 15, 2016 10:51 am
Has thanked: 24 times
Been thanked: 5 times
Contact:

Re: Downstream - BL0106 - Click - Component Request

Post by r_teixeir »

Hi Kersing, I finally realized that I need help with the lcd_mini_click. It has a mcp4161 digital pot and a mcp23S17 on the same click. By using this click I can have more I/O left to be used.

Can you help with it

Thanks

Rod
Attachments
LDD_Mini_Click.jpg
LDD_Mini_Click.jpg (97.25 KiB) Viewed 4293 times

kersing
Valued Contributor
Valued Contributor
Posts: 2045
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 553 times
Been thanked: 1081 times
Contact:

Re: Downstream - BL0106 - Click - Component Request

Post by kersing »

Have you checked if those chips are supported already? (They might be part of an eblock)
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis

r_teixeir
Posts: 96
Joined: Fri Jul 15, 2016 10:51 am
Has thanked: 24 times
Been thanked: 5 times
Contact:

Re: Downstream - BL0106 - Click - Component Request

Post by r_teixeir »

Hi Kersing, the lcd_mini has a digital pot(MCP4161), and Benj has just created and uploaded.

Thanks

Rod

Post Reply