STM32!
Moderator: Benj
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
STM32!
Hi all!
Does FC8 support the STM32 or a similar. I see that it is a powerfull device. https://www.banggood.com/STM32F103C8T6- ... ntent=3216
I have seach in the drop down list but can´t find it, maybe under another name.
Thank´s in advance
Br Jorgen
Does FC8 support the STM32 or a similar. I see that it is a powerfull device. https://www.banggood.com/STM32F103C8T6- ... ntent=3216
I have seach in the drop down list but can´t find it, maybe under another name.
Thank´s in advance
Br Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hello Leigh!
Thank’. Do I need to buy the chippack for Arm for these devises or can I ude the Arduinopack?
Br Jorgen
Thank’. Do I need to buy the chippack for Arm for these devises or can I ude the Arduinopack?
Br Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi again Ligh!
I want to buy the ARM chippack, but when I look at my licence I see acroos over the ARM. If I click on ti I see "buy" I click, but no link.
How to buy these chips please? and the programmingway for this device, is this via USB?
STMicroelectronics STM32 Nucleo-64 MCU
Br Jorgen
I want to buy the ARM chippack, but when I look at my licence I see acroos over the ARM. If I click on ti I see "buy" I click, but no link.
How to buy these chips please? and the programmingway for this device, is this via USB?
STMicroelectronics STM32 Nucleo-64 MCU
Br Jorgen
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: STM32!
Hi Jorgen,
Yes the Nucleo boards can be programmed via USB.
Just check that you get one that is on our supported list.
I will ask someone else to comment on the ARM pack purchase.
Leigh
Yes the Nucleo boards can be programmed via USB.
Just check that you get one that is on our supported list.
I will ask someone else to comment on the ARM pack purchase.
Leigh
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Ok, Nice. No I don’t have the ARM chippack I have checked. So please a guide to buy it can’t see anyhvere in your website to buy. Thank’s Leigh
Br Jorgen
Br Jorgen
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: STM32!
Hi Jorgen,
Use the Add To License button here to add bits to your Flowcode license.
https://www.matrixtsl.com/flowcode/buy/
Use the Add To License button here to add bits to your Flowcode license.
https://www.matrixtsl.com/flowcode/buy/
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi Ben!
Thank you. I have just bougth the ARM chip. I try to activate my license again and restart FC8. But I still have a red X on arm chippack.
Do I have to wait or is there another thing I have to do?
One more thing I need a receipt. Are you able to send one to the email I wrote when I order, please.
Br Jorgen
Thank you. I have just bougth the ARM chip. I try to activate my license again and restart FC8. But I still have a red X on arm chippack.
Do I have to wait or is there another thing I have to do?
One more thing I need a receipt. Are you able to send one to the email I wrote when I order, please.
Br Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi again!
It´s ok now the ARM pack is activated
But please, I still need a receipt. Will you please ask someone in Matrix to send it to the email I used when I order the chippack.
Look forward to test Arm.
Thank´s in advance.
Jorgen
It´s ok now the ARM pack is activated
But please, I still need a receipt. Will you please ask someone in Matrix to send it to the email I used when I order the chippack.
Look forward to test Arm.
Thank´s in advance.
Jorgen
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: STM32!
Hi Jorgen.
I've forwarded your request to the sales team and hopefully they will forward you the receipt tomorrow.
I've forwarded your request to the sales team and hopefully they will forward you the receipt tomorrow.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi Ben!
Just received my STM32F0308Discovery board. I made a simple test. But I am not able to program the board. It seem to compile, but when it have to progamming, I get ERROR code 1
I have installed the toolchain STARM and the ARM. When I connect the board to the USB, the PC see the USB.
Is there anything I forgot to do Please?
Br Jorgen
Just received my STM32F0308Discovery board. I made a simple test. But I am not able to program the board. It seem to compile, but when it have to progamming, I get ERROR code 1
I have installed the toolchain STARM and the ARM. When I connect the board to the USB, the PC see the USB.
Is there anything I forgot to do Please?
Br Jorgen
- Attachments
-
- STM32F0308 Discovery.msg.txt
- (55.66 KiB) Downloaded 168 times
-
- STM32F0308 Discovery.fcfx
- (6.34 KiB) Downloaded 149 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: STM32!
Hi Jorgen,
Does a drive appear in your My Computer folder when you connect the board? If so then what's the name of the drive?
Does a drive appear in your My Computer folder when you connect the board? If so then what's the name of the drive?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi again Ben!
It is recognized but with a question mark. When I open the path there is no driver for this, so, again please advice
Translated : There is no compatible driver for this unit.
Driver for this unit is not installed.
If I try to update driver, it says: no driver for this unit.
Br Jorgen
It is recognized but with a question mark. When I open the path there is no driver for this, so, again please advice
Translated : There is no compatible driver for this unit.
Driver for this unit is not installed.
If I try to update driver, it says: no driver for this unit.
Br Jorgen
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: STM32!
Hi Jorgen,
Looks like the USB driver has not installed, could you try downloading and installing the latest ST-LINK USB driver from here ...
https://www.st.com/en/development-tools ... nk009.html
Also, could you please check that you have ST-LINK_CLI.exe in your directory …
C:\Program Files (x86)\Flowcode\Common\Compilers\starm\ST-LINK Utility
Thanks,
Leigh
Looks like the USB driver has not installed, could you try downloading and installing the latest ST-LINK USB driver from here ...
https://www.st.com/en/development-tools ... nk009.html
Also, could you please check that you have ST-LINK_CLI.exe in your directory …
C:\Program Files (x86)\Flowcode\Common\Compilers\starm\ST-LINK Utility
Thanks,
Leigh
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi Leigh!
Yes I have the ST-LINK_CLI.exe in the directory.
I try to download the driver via your link, but this is not possible.
I follow your link, add my name and email. I receive an email, verifying, click on this, extrem slowly website, then I click on download, after looong time I get the message; "Start over" and have to start from start again. Sometime I get the message stop cause "long script. Sorry. I accept cookie´s. They want me to accept before downloadning.
In a try to find the driver somewhere else, I google it and see this is an issue for many.....
Is there another way to get the driver.
Br Jorgen
Yes I have the ST-LINK_CLI.exe in the directory.
I try to download the driver via your link, but this is not possible.
I follow your link, add my name and email. I receive an email, verifying, click on this, extrem slowly website, then I click on download, after looong time I get the message; "Start over" and have to start from start again. Sometime I get the message stop cause "long script. Sorry. I accept cookie´s. They want me to accept before downloadning.
In a try to find the driver somewhere else, I google it and see this is an issue for many.....
Is there another way to get the driver.
Br Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hello all!
Meanwhile I managed to download the driver. Later this afternoon when I have install the driver, you hear.
Br Jorgen
Meanwhile I managed to download the driver. Later this afternoon when I have install the driver, you hear.
Br Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi Leigh!
I install the driver, and now I can see the device usb. But still not able to program the device.
Please look in att.
Br Jorgen
I install the driver, and now I can see the device usb. But still not able to program the device.
Please look in att.
Br Jorgen
- Attachments
-
- Usb Ok.PNG
- (11.92 KiB) Downloaded 2387 times
-
- STM.msg.txt
- (7.04 KiB) Downloaded 94 times
-
- STM.fcfx
- (6.34 KiB) Downloaded 125 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: STM32!
That looks like another instance of the Windows short path problem, regarding which there have been a few posts on this forum.
(I think that fix involves changing a setting in Windows and then re-installing the ST ARM toolchain)
I will also have a look at the ST ARM compiler/programmer settings to see if we can get round this problem.
(I think that fix involves changing a setting in Windows and then re-installing the ST ARM toolchain)
I will also have a look at the ST ARM compiler/programmer settings to see if we can get round this problem.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi Leigh!
Well, ok Leigh. When I ask you, before I bought the chippack and the device, I though you have tested it and knew it was working
Hopefully you are able to fix it. Otherwise I lost money for the ARM chippack
Look forward to hear from you.
Thank´s in advance.
Br Jorgen.
Well, ok Leigh. When I ask you, before I bought the chippack and the device, I though you have tested it and knew it was working
Hopefully you are able to fix it. Otherwise I lost money for the ARM chippack
Look forward to hear from you.
Thank´s in advance.
Br Jorgen.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: STM32!
Hi Leigh!
I have 3 Labtop. On all machine I use Win10. The one of them is a newer one and a 64bit.
To be sure, I have installed the driver on all machine, But same issue on all.
Strange If it work for you?
Br Jorgen
I have 3 Labtop. On all machine I use Win10. The one of them is a newer one and a 64bit.
To be sure, I have installed the driver on all machine, But same issue on all.
Strange If it work for you?
Br Jorgen
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: STM32!
OK, thanks for the update.
I'm running on Windows 7, but we do have Windows 10 machines too.
I'm sure the issue is to do with short paths on Windows 10, which some of my colleagues know more about.
(I personally prefer Penguins to Windows
Windows cannot find the path to the STLink programmer
I am also looking into the possibility of changing the programmer settings to try and avoid the issue
I'm running on Windows 7, but we do have Windows 10 machines too.
I'm sure the issue is to do with short paths on Windows 10, which some of my colleagues know more about.
(I personally prefer Penguins to Windows
Windows cannot find the path to the STLink programmer
I am also looking into the possibility of changing the programmer settings to try and avoid the issue
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: STM32!
Hi Jorgen,
Could you please try updating to the attached file.
This to go into the compiler directory, normally at ...
C:\Program Files (x86)\Flowcode\Common\Compilers\starm\batch
You might need admin privileges.
Thanks
Leigh
Could you please try updating to the attached file.
This to go into the compiler directory, normally at ...
C:\Program Files (x86)\Flowcode\Common\Compilers\starm\batch
You might need admin privileges.
Thanks
Leigh
- Attachments
-
- stm32prog.bat
- (419 Bytes) Downloaded 118 times